Dell PowerEdge XE9780 Installation and Service Manual

Thermal restriction matrix

Table 1. Thermal Restriction Matrix- 6^th Generation Intel® Xeon® Processors The table describes the thermal restriction matrix:
Configuration					E3.S x16
Component	Processor	cTDP	Cores	Part number	B300 + 4 x PCIe card + 8 x OSFP	B200 +12 x PCIe card
CPU	Intel GNR-SP 6787P	350 W	86	7FRX4	2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
	Intel GNR-SP 6767P	350 W	64	KJWD6	2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
	Intel GNR-SP 6747P	330 W	48	92C7P	2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
Memory			64GB RDIMM 6400 MT/s		2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
			96GB RDIMM 6400 MT/s		2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
			128GB RDIMM 6400 MT/s		2U-Ext HSK/STD Fan	2U-Ext HSK/STD Fan
DPU			B3220		STD fan	-
GPU			NVIDIA B300 1100W 8-way		STD Fan	-
GPU			NVIDIA B200 1000W 8-way		-	STD Fan

Configurations that support ASHRAE A3 and A4 are not available.

A PCIe blank (DPN: GYP32) is required if no PCIe card is installed in any slot.

A low-profile block is required when installing a low-profile card.

DIMM blanks are required if fewer than 16 DIMMs are installed.

M.2, OCP, and HDD blanks are required if the corresponding components are not installed.

GPU fans are hot-swappable and must be reinstalled within 30 seconds.