Thermal Restrictions
ASHRAE A4 Support Restriction for RAF (Reverse Air Flow Direction) Configurations
- CPU TDP greater than 120 W is not supported within A3/A4.
- The NVIDIA A30 card is not supported above 45°C ambient temperature.
- The NVIDIA A2 GPU card is not supported above 45°C ambient temperature.
- In redundant mode, two power supplies are required. A single power supply failure is not supported.
- If memory slots are not fully populated, dummy DIMMs are required.
Edge 1 Support Restriction for RAF (Reverse Air Flow Direction) Configurations
- CPU TDP greater than 120 W is not supported within A3/A4.
- The NVIDIA A30 card is not supported above 45°C ambient temperature.
- The NVIDIA A2 GPU card is not supported above 45°C ambient temperature.
- In redundant mode, two power supplies are required. A single power supply failure is not supported.
- If memory slots are not fully populated, dummy DIMMs are required.
Edge 2 Support Restriction for RAF (Reverse Air Flow Direction) Configurations
- CPU TDP greater than 120 W is not supported within A3/A4.
- The NVIDIA A30 card is not supported above 45°C ambient temperature.
- The NVIDIA A2 GPU card is not supported above 45°C ambient temperature.
- Micron M.2 with 1.92 TB and 3.84 TB on Riser Module has active throttling for thermal protection when fully loaded and at 55 °C environment temperature.
- Micron M.2 with 3.84 TB on AIC card has active throttling for thermal protection when fully loaded and at 55°C environment temperature.
- In redundant mode, two power supplies are required. A single power supply failure is not supported.
- If memory slots are not fully populated, dummy DIMMs are required.
ASHRAE A4 Support Restriction for NAF (Normal Air Flow Direction) Configurations
- CPU TDP greater than 120 W is not supported within A4.
- The NVIDIA A30 card is not supported above 45°C environment temperature.
- The NVIDIA A2 GPU card is not supported above 45°C environment temperature.
- In redundant mode, two power supplies are required. A single power supply failure is not supported.
- If memory slots are not fully populated, dummy DIMMs are required.
