PowerEdge Servers Error and Event Messages Reference Guide

PDF

BEZL—Bezel Air filter sensor Event Messages

BEZL0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The filtered bezel is removed from the server.
Detailed Description
The filtered bezel is removed from the server.
Recommended Response Action
No response action is required.
Category
System Health (BEZL = Bezel Air filter sensor)
Severity
Informational
Trap/EventID
3251
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The air Filter in the bezel has a connectivity issue.
Detailed Description
The air Filter in the bezel has a connectivity issue.
Recommended Response Action
Make sure that the air filter is properly installed and has no connection issues. If necessary, reinstall the air filter to get a cleaner air inlet.
Category
System Health (BEZL = Bezel Air filter sensor)
Severity
Critical
Trap/EventID
3249
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Air filter functionality in bezel is degraded.
Detailed Description
Air filter in bezel is not functioning as expected and needs replacement.
Recommended Response Action
Replace the Air filter with a cleaner air inlet.
Category
System Health (BEZL = Bezel Air filter sensor)
Severity
Warning
Trap/EventID
3250
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The air filter in the bezel is operating normally.
Detailed Description
The air filter in the bezel is operating normally.
Recommended Response Action
No response action is required.
Category
System Health (BEZL = Bezel Air filter sensor)
Severity
Informational
Trap/EventID
3251
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The filtered bezel is installed in the chassis.
Detailed Description
The filtered bezel is installed in the chassis.
Recommended Response Action
No response action is required.
Category
System Health (BEZL = Bezel Air filter sensor)
Severity
Informational
Trap/EventID
3251
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The air filter health cannot be determined due to all the sleds not being populated or powered on in the chassis.
Detailed Description
The air filter health can be determined once all nodes are installed and powered on.
Recommended Response Action
No response action is required.
Category
Updates (BEZL = Bezel Air filter sensor)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

BEZL0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Chassis configuration is changed. To continue to monitor the air filter health, perform the Reset Air Filter operation.
Detailed Description
The Chassis configuration is updated that has resulted in a change in the threshold airflow pressure value.
Recommended Response Action
To continue to monitor the air filter health, perform the Reset Air Filter operation. On the iDRAC User Interface (UI), click Environment. To reset by using the RACADM command, run: "racadm bezelfilter resetfilterlife" at the RACADM CLI. To reset by using the REST API command, run: /redfish/v1/Chassis/{ChassisId}/Actions/Oem/DellOemChassis.ResetFilterLife.
Category
Updates (BEZL = Bezel Air filter sensor)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\