PowerEdge Servers Error and Event Messages Reference Guide

PDF

LOG—Log Event Event Messages

LOG001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Missing required InstanceID or JobID parameter.
Detailed Description
One or more required parameters needed for the method invoked in the operation are missing.
Recommended Response Action
To provide the correct value for the specified parameter, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
An invalid parameter ID is entered for arg1.
Arguments
  • arg1 = instance ID/job ID
Detailed Description
An invalid parameter ID is entered for the instance ID or job ID identified in the message.
Recommended Response Action
Ensure that a valid parameter is entered for the instance ID or job ID. For a list of valid parameters and usage guidelines, see the Lifecycle Controller Remote Services Quick Start Guide available on the official support site.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
ConfigResults not available for log entry specified.
Detailed Description
The log entry with the specified InstanceID does not have any associated configuration results.
Recommended Response Action
Verify the ConfigResults availability for the InstanceID through enumeration of the LogEntry class and retry the operation. Refer to the Lifecycle Controller-Remote Services documentation.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Resource allocation failure.
Detailed Description
The operation did not complete successfully because of lack of memory or file space in iDRAC firmware.
Recommended Response Action
Reset iDRAC and retry the operation.
Category
Configuration (LOG = Log Event)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Cannot perform the operation due to an unknown error in iDRAC.
Detailed Description
The operation did not complete successfully because of an unknown error in iDRAC.
Recommended Response Action
Retry the operation. If the issue persists, reset the iDRAC.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Test event generated for message ID arg1.
Arguments
  • arg1 = message ID
Detailed Description
This message is generated while performing a Test Event action. Performing a Test Event action logs an event in the Lifecycle Log with the user specified message ID. It may also generate events through SNMP, email, or other event notification sources if they are enabled. The test event does not indicate that there is a hardware or software problem. It provides a mechanism for users to test their event processing applications.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The previous log entry was repeated arg1 times.
Arguments
  • arg1 = log entry count
Detailed Description
This message is generated after a series of sequential duplicate events. Log entry count is the number of times the previous message was repeated.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Filter Visibility, LC Log*

LOG008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The complete Lifecycle Log was successfully created for an export operation.
Detailed Description
The complete Lifecycle Log was successfully created for a requested export operation.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The current Lifecycle Log is successfully created for the view or export operation.
Detailed Description
The current Lifecycle Log is successfully created for the view or export operation.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG201

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Recovered from Lifecycle Controller Log corruption.
Detailed Description
Lifecycle Controller Log corruption was detected during iDRAC boot. The Lifecycle Controller Log was truncated at the point of corruption.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG202

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Recovered from Lifecycle Controller Log comments file corruption.
Detailed Description
Unable to access part of Lifecycle Controller Log comments file during iDRAC boot. The file was truncated at the point of corruption.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG203

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Lifecycle Log archived up to Log Sequence number arg1.
Arguments
  • arg1 = sequence number
Detailed Description
This message is generated while archiving Lifecycle Log. All the older messages are archived and can be retrieved using the export Lifecycle Log feature.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG204

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Lifecycle Log archive operation did not complete.
Detailed Description
The archive operation did not complete. 10% of the events from the cache will be dropped to make space for new events.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG300

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The system recovered from Chassis Log file corruption.
Detailed Description
The system recovered from Chassis Log file corruption. Some log entries may not be recovered.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG302

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Chassis Log file header is corrupted.
Detailed Description
The Chassis Log file header is corrupted. The Chassis Log will be recreated and all current log entries will not be preserved.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG303

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to archive the Chassis Log file.
Detailed Description
Unable to rename current Chassis Log file during archive operation. Some log entries may be lost.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG305

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Chassis Log file was cleared.
Detailed Description
The Chassis Log file was cleared as a result of clear log operation.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG320

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Log monitoring is disabled. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
The hardware log in the system is disabled. The log type information is provided.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Warning
OMSA Event ID
5550
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG321

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The log status is unknown. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
The hardware log may not be up-to-date. The log type information is provided.
Recommended Response Action
Make sure that iDRAC is functioning correctly.
Category
System Health (LOG = Log Event)
Severity
Informational
OMSA Event ID
5551
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG322

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The log size is no longer near the maximum capacity. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
The hardware log in the system is no longer near its maximum capacity. The log type information is provided.
Recommended Response Action
No response action is required.
Category
System Health (LOG = Log Event)
Severity
Informational
OMSA Event ID
5552
OMSA Trap ID
5552
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG323

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The log size is near maximum capacity. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
The size of a hardware log in the system is near its maximum capacity. The log type information is provided.
Recommended Response Action
Clear the log to make sure new entries are recorded.
Category
System Health (LOG = Log Event)
Severity
Warning
OMSA Event ID
5553
OMSA Trap ID
5553
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG324

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The log size has reached its maximum capacity. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
The size of a hardware log in the system has reached its maximum capacity. The log type information is provided.
Recommended Response Action
Clear the log to make sure new entries are recorded.
Category
System Health (LOG = Log Event)
Severity
Critical
OMSA Event ID
5554
OMSA Trap ID
5554
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG325

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to receive any log entries. Log type: arg1.
Arguments
  • arg1 = log type
Detailed Description
Unable to receive any log entries, and therefore log status cannot be monitored. The log type information is provided.
Recommended Response Action
Make sure that iDRAC is functioning correctly.
Category
System Health (LOG = Log Event)
Severity
Critical
OMSA Event ID
5555
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG326

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Alert Log was cleared.
Detailed Description
The Alert Log was cleared.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG327

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
An Alert Log backup was created.
Detailed Description
An Alert Log backup was created.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG328

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Server Based Management Mode is enabled.
Detailed Description
The Server Based Management Mode is enabled. Chassis based PSUs, fans, and sensor information can be displayed from server based system management tools.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG329

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Server Based Management Mode is disabled.
Detailed Description
The Server Based Management Mode is disabled. Chassis based PSUs, fans, and sensor information will not be displayed from server based system management tools.
Recommended Response Action
No response action is required.
Category
Audit (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

LOG501

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to run the command because of a general issue.
Detailed Description
The command cannot be run because a general issue occurred.
Recommended Response Action
Retry the operation. If the issue persists, reset the CMC, and then retry the operation.
Category
Configuration (LOG = Log Event)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG502

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to run the command because the method parameter arg1 is missing.
Arguments
  • arg1 = parameter
Detailed Description
The command cannot be run because the method parameter identified in the message is missing.
Recommended Response Action
Enter all the parameters required in the command, and then retry the operation. For more information, see the Chassis Record Log Profile.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG503

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to run the method because the parameter arg1 is not valid.
Arguments
  • arg1 = parameter
Detailed Description
The command cannot be run because the value of the parameter identified in the message is not valid.
Recommended Response Action
Enter all the parameters required in the command as per the enumeration, and then retry the operation. For more information, see the Chassis Record Log Profile.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG504

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Chassis Log Export was successful.
Detailed Description
The Chassis Log was successfully exported to the destination specified.
Recommended Response Action
No response action is required.
Category
Configuration (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG505

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to access the network share.
Detailed Description
The network share access cannot be accessed.
Recommended Response Action
Make sure that correct network share access credentials are entered (such as IP address, username, password, and share type). For more information, see the Chassis Record Log Profile.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG506

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to start the requested operation because the ExportChassisLog operation is already running.
Detailed Description
The requested operation cannot be started because the ExportChassisLog operation is already running.
Recommended Response Action
Wait for the current ExportChassisLog operation to complete and then retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG507

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to allocated required CMC resources.
Detailed Description
The operation did not complete successfully because of lack of memory or file space in the CMC.
Recommended Response Action
Reset the CMC and retry the operation.
Category
Configuration (LOG = Log Event)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG508

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to write to the network share.
Detailed Description
The network share may be read-only or it may not have sufficient space for the export operation.
Recommended Response Action
Verify the network share is not read-only and has sufficient space for exporting, then retry the operation.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG509

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to run the command because the parameter value of arg1 exceeds the maximum allowed number of arg2 characters.
Arguments
  • arg1 = parameter name
  • arg2 = max parameter length
Detailed Description
The command cannot be run because the value of the parameter identified in the message exceeds the maximum length identified in the message.
Recommended Response Action
Enter a value for the parameter identified in the message that is equal to or less than the maximum allowed characters.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG510

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the operation because of an unknown issue in the CMC.
Detailed Description
The operation cannot be completed because of an unknown issue.
Recommended Response Action
Retry the operation. If the issue persists, reset CMC and then retry the operation.
Category
Configuration (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG908

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the IP address because iDRAC detected that this IP address is already used by another device on the network: arg1.
Arguments
  • arg1 = IP Address
Detailed Description
The IP address cannot be assigned because iDRAC detected that this IP address is already used by another device on the network.
Recommended Response Action
Enter a unique IP address to iDRAC and retry the operation.
Category
System Health (LOG = Log Event)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG909

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to connect to remote console: arg1.
Arguments
  • arg1 = parameter
Detailed Description
An IP address-change announcement could not be sent to the remote console identified in the message. The problem could be due to loss of network connectivity, or the remote console is down or not responding.
Recommended Response Action
Check to ensure the remote console is reachable and responding to IP address change announcements from the iDRAC.
Category
System Health (LOG = Log Event)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

LOG910

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
AutoDiscovery communicated successfully with management console: arg1.
Arguments
  • arg1 = parameter
Detailed Description
An IP address-change announcement was sent successfully to the remote console identified in the message.
Recommended Response Action
No response action is required.
Category
System Health (LOG = Log Event)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\