PowerEdge Servers Error and Event Messages Reference Guide
OSD—OS Deployment Event Messages
OSD062
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The process of installing an operating system or hypervisor is started and is in progress.
- Detailed Description
- The process of installing an operating system or hypervisor is started and is in progress.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD063
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The process of installing an operating system or hypervisor is successfully completed.
- Detailed Description
- The process of installing an operating system or hypervisor is successfully completed.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD064
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The process of installing an operating system or hypervisor is abruptly stopped either by the user or the installation infrastructure.
- Detailed Description
- The process of installing an operating system or hypervisor is abruptly stopped either by the user or the installation infrastructure.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD065
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Operating System/Hypervisor Installation did not complete successfully.
- Detailed Description
- The Operating System/Hypervisor installation did not complete successfully. The system may be unable to boot into the operating system/hypervisor because of the incomplete installation.
- Recommended Response Action
- Check the installation logs of operating system or hypervisor, resolve any issues identified, and then retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD1
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The command was successful.
- Detailed Description
- The command was successful.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD10
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Installation not supported for the selected operating system.
- Detailed Description
- Installation for the selected operating system is not supported. Make sure that the correct operating system name was entered.
- Recommended Response Action
- Recheck the operating system name with the output of GetDriverPackInfo().
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD11
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Driver Pack does not have drivers for the selected operating system.
- Detailed Description
- Lifecycle Controller does not have any drivers for the selected operating system. The operating system installation uses the native drivers present on the operating system media.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD12
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot create the USB device needed to copy drivers for the selected operating system.
- Detailed Description
- iDRAC was unable to create and expose the drivers as a USB device for the OS installation to proceed.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD13
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot mount the USB device needed to copy drivers for the selected operating system.
- Detailed Description
- iDRAC was unable to mount the drivers as a USB device for the OS installation to proceed.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD14
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to expose the USB device that contains the operating system drivers to host system.
- Detailed Description
- iDRAC was unable to expose the drivers as a USB device for the OS installation to proceed.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD15
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Mount network share failed - incorrect username or password.
- Detailed Description
- Unable to mount the network share using the credentials specified in the command because either the username or password is incorrect.
- Recommended Response Action
- Rerun the command with the correct username and password.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD16
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Mount network share failed - incorrect IP address or share name.
- Detailed Description
- Unable to mount the network share using the parameters specified in the command because either the IP address or share name is incorrect.
- Recommended Response Action
- Rerun the command with the correct IP address and share name.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD17
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Exposing ISO image as internal device to the server failed.
- Detailed Description
- Unable to expose the ISO image as an internal CD device to the host system because the ISO file is no longer present, network errors are preventing access to the ISO file, or iDRAC may not be responsive.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD18
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to locate the ISO image on the network share point.
- Detailed Description
- Unable to find the ISO file specified in the network share. Make sure that the correct ISO file path was entered into the command and that all other user credentials are correct.
- Recommended Response Action
- Rerun the command with the correct ISO file path.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD19
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The fork() command for a child process to perform the task failed.
- Detailed Description
- Failed to execute fork() system call to perform the task in a child process. iDRAC may be unresponsive.
- Recommended Response Action
- Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD2
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation cannot be completed because of an internal error.
- Detailed Description
- Unable to complete the operation because of an internal error.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and run the command. To reset the iDRAC by using Graphical User Interface (GUI), click Maintenance > Diagnostics > Reset. To reset by using RACADM, run the command at the Command Line Interface (CLI): racadm racreset.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD20
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to get size or label from Driver Pack for selected operating system.
- Detailed Description
- Unable to get the size or label for selected operating system from the Driver Pack present in Lifecycle Controller. The driver pack may be corrupt.
- Recommended Response Action
- Update the Driver Pack using Lifecycle Controller GUI / Unified Server Configurator (USC) or DUP and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD21
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to boot to ISO image.
- Detailed Description
- Booting to ISO has failed. Either BIOS was unable to boot to the ISO image or the provider did not get a response in 5 minutes from BIOS on successful boot to ISO image.
- Recommended Response Action
- 1) Make sure that a POST error did not result in user interaction (Press F1 to continue or F2 to run BIOS setup). 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD22
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to detach ISO image from the host.
- Detailed Description
- Unable to detach ISO image from the host because either the image is already detached, or iDRAC may not be operating normally.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD23
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to continue with DetachISOImage - another command is in the process of exposing the ISO Image and booting to it.
- Detailed Description
- Cannot continue with DetachISOImage because another command is in the process of exposing the ISO image and booting to it.
- Recommended Response Action
- See the ConcreteJob status to make sure that the current running process is complete and then run DetachISOImage.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD24
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to continue with DetachDrivers - UnPackAndAttach is in progress.
- Detailed Description
- Unable to continue with DetachDrivers - UnPackAndAttach is in progress.
- Recommended Response Action
- Wait until UnpackAndAttach finishes and then run DetachDrivers. This can take more than 5 minutes.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD25
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to detach USB device containing operating system drivers.
- Detailed Description
- Detaching the USB device (that contains drivers for the operating system installation) from the host has failed. The device may be detached, or iDRAC may not be operating normally.
- Recommended Response Action
- Reset iDRAC to detach this device automatically.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD26
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to continue with BootToPXE - another command is running.
- Detailed Description
- Unable to continue with BootToPXE command because another process is using Lifecycle Controller.
- Recommended Response Action
- See ConcreteJob status to make sure that the running process is complete, and then run BootToPXE.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD27
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copying drivers for selected operating system failed.
- Detailed Description
- Copying drivers for selected operating system failed. The Driver Pack may be unusable.
- Recommended Response Action
- Update the Driver Pack using Lifecycle Controller (LC)/Unified Server Configurator (USC) or Dell Update Package (DUP) and then rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD28
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Hash verification on the ISO image failed.
- Detailed Description
- Hash verification on the ISO image has failed. The hash value specified in the command is either incorrect or the ISO image has been changed.
- Recommended Response Action
- 1) Verify that the hash value specified in the command is correct. 2) Make sure that the ISO has not been changed 3) Replace the ISO image on the share and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD29
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Driver Pack configuration file not found in Lifecycle Controller. The Driver Pack might be corrupt.
- Detailed Description
- Driver Pack configuration file not found in Lifecycle Controller. Driver Pack may be unusable.
- Recommended Response Action
- Update the Driver Pack using Lifecycle Controller (LC)/Unified Server Configurator (USC) or Dell Update Package (DUP) and then rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD3
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Lifecycle Controller is being used by another process.
- Detailed Description
- Lifecycle Controller is currently locked by another process. Make sure that the process completes before attempting to run another command.
- Recommended Response Action
- 1) After two minutes, rerun the command. 2) Make sure that Lifecycle Controller GUI or Unified Server Configurator or DUP is not currently running on the server. 3) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD30
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid value for ExposeDuration - must be 60 - 65535 seconds
- Detailed Description
- The value specified for ExposeDuration is out of range. It must be between 60 and 65535 seconds.
- Recommended Response Action
- Rerun the command with a ExposeDuration value between 60 and 65535 seconds.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD31
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copying operating system drivers to network share failed
- Detailed Description
- Copying drivers for the selected operating system to network share failed. The share may be read-only or the Driver Pack present in Lifecycle Controller may be unusable.
- Recommended Response Action
- 1) Make sure that the network share has write permission. 2) Update the Driver Pack using Lifecycle Controller or Unified Server Configurator or DUP and then rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD32
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to either fetch ISO info or complete the operation because the ISO image file is not attached.
- Detailed Description
- The operation cannot be completed because the ISO image file is not associated to the server.
- Recommended Response Action
- Ensure that a valid ISO image file is properly associated with the server before retrying the operation. For detailed instructions on how to associate an ISO image with the server, please refer to the Redfish API Guide available on the support site.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD33
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Installed BIOS version does not support this method.
- Detailed Description
- The system has an older version of BIOS that does not support this method. Install the latest version of BIOS to use this method.
- Recommended Response Action
- Update the BIOS to version 1.2 or later and then rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD34
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to continue with BootToPXE - ISO image is attached to the system.
- Detailed Description
- Unable to continue with BootToPXE command because the system has an ISO image attached. Detach the ISO image before continuing with BootToPXE.
- Recommended Response Action
- Run the DetachISOImage command and then run BootToPXE.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD35
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Lifecycle Controller is not enabled.
- Detailed Description
- Lifecycle Controller is disabled on the system, so none of the remote operating system deployment commands will work. Make sure Lifecycle Controller is enabled before running any command.
- Recommended Response Action
- For 11G systems: Use the iDRAC configuration utility to enable the System Services by pressing on the CTRL+E option on boot up at the targeted system. For 12G and above generations: Use F2 Setup, select iDRAC Configuration, and select Lifecycle Controller Settings, to enable the Lifecycle Controller on boot up of the targeted system.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD36
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Boot to ISO Image has been cancelled by using CTRL+E or F2 option on the server.
- Detailed Description
- User has cancelled system services by using the CTRL+E option (iDRAC configuration utility) or F2 option during POST. This action cancels the WSMAN request to boot to ISO.
- Recommended Response Action
- To resolve the issue rerun the command. Do not cancel system services using CTRL+E or F2 during POST when system is rebooting to the ISO.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD37
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- ISO image size too large.
- Detailed Description
- ISO Image size is bigger than the available size in vFlash.
- Recommended Response Action
- 1) Use a smaller size ISO Image. 2) Format the vFlash using the iDRAC GUI, RACADM, or iDRAC configuration utility and then retry this command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD38
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copying the ISO image from the network failed.
- Detailed Description
- There was an error while copying the ISO from the network share.
- Recommended Response Action
- 1) Make sure the network connection is functional. 2) Make sure the Dell vFlash does not have hardware issues by accessing it through the iDRAC GUI.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD39
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to find the VFlash.
- Detailed Description
- Unable to get vFlash information from internal instrumentation.
- Recommended Response Action
- 1) Make sure the Dell vFlash is seated correctly. 2) Make sure a Dell licensed vFlash card is inserted 3) Make sure the Dell vFlash does not have any hardware issues by accessing it through the iDRAC GUI.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD4
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot access Lifecycle Controller Driver Pack partition.
- Detailed Description
- Driver Pack partition in Lifecycle Controller is not accessible. The Lifecycle Controller or the iDRAC might be unresponsive.
- Recommended Response Action
- Reset the iDRAC and rerun the command. If the command fails again, check if the iDRAC is functional and accessible on the system.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD40
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- VFlash is not Dell licensed.
- Detailed Description
- This is not a Dell-licensed vFlash.
- Recommended Response Action
- Insert a Dell vFlash and then retry this command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD41
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- ISO Image not found on VFlash.
- Detailed Description
- vFlash does not contain the ISO Image because either the image was deleted, or it was never copied.
- Recommended Response Action
- Download the ISO Image to the vFlash again using the DownloadISOToVFlash method.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD42
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Downloading ISO File to VFlash failed.
- Detailed Description
- There was an error while copying the ISO image from the network share to the vFlash.
- Recommended Response Action
- 1) Make sure the network connection is working. 2) Make sure the Dell vFlash does not have any hardware issues by accessing it through the iDRAC GUI.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD43
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- VFlash unavailable.
- Detailed Description
- vFlash is not present on the server.
- Recommended Response Action
- Insert a Dell-licensed vFlash and then retry this command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD44
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to detach ISO image on VFlash.
- Detailed Description
- The ISO on vFlash is not currently attached, so the DetachISOFromVFlash command could not be executed.
- Recommended Response Action
- Since the ISO image is not attached, the DetachISOFromVFlash command does not have to be run.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD45
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot delete ISO image from VFlash.
- Detailed Description
- The ISO Image present in vFlash is attached to the host system. The ISO Image cannot be deleted from vFlash.
- Recommended Response Action
- Execute DetachISOFromVFlash() before running DeleteISOFromVFlash().
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD46
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- VFlash in use.
- Detailed Description
- Another process (iDRAC GUI /racadm/iDRAC configuration utility) is currently accessing vFlash.
- Recommended Response Action
- Wait until the access to vFlash is relinquished and then retry this command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD47
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Inaccessible network share.
- Detailed Description
- Unable to access the network share using the credentials specified or the firewall might be enabled and is preventing access to the share.
- Recommended Response Action
- Make sure that the firewall is disabled, and that the credentials (username, password) are correct.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD48
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- ISO Images of more than 4GB not supported.
- Detailed Description
- ISO Images of more than 4GB are not supported and cannot be copied to VFlash.
- Recommended Response Action
- Use an ISO that is smaller than 4GB.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD49
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disable RIPS mode to access VFlash.
- Detailed Description
- vFlash cannot be accessed because RIPS mode is enabled.
- Recommended Response Action
- Disable the RIPS mode from BIOS or from the iDRAC GUI, and then continue executing the method.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD5
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Lifecycle Controller Driver Pack not found.
- Detailed Description
- A Driver Pack was not found on the Lifecycle Controller.
- Recommended Response Action
- Update the Driver Pack using Lifecycle Controller or Unified Server Configurator (USC) or DUP and then run the command again.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD50
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Lifecycle Controller is in field service mode.
- Detailed Description
- Lifecycle Controller is in field service mode and needs to be updated before proceeding further.
- Recommended Response Action
- Install the Lifecycle Controller field services package using the iDRAC GUI.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD51
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Reboot the system to run pending System Services Tasks.
- Detailed Description
- There are pending System Services tasks on the host system that are preventing the execution of this method.
- Recommended Response Action
- Reboot the host system. The system will automatically enter System Services and complete the pending tasks.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD52
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- vFlash is disabled.
- Detailed Description
- vFlash is disabled.
- Recommended Response Action
- Enable the vFlash from the iDRAC GUI or RACADM, and then proceed.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD53
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- vFlash is write protected.
- Detailed Description
- vFlash is write protected.
- Recommended Response Action
- Remove the write protect from the SD card and then proceed.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD54
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- vFlash already has 16 partitions.
- Detailed Description
- vFlash allows only 16 partitions to be created.
- Recommended Response Action
- Make sure that there are less than 16 partitions before creating another partition on vFlash.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD55
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- ISO Image is attached to host
- Detailed Description
- Cannot attach the ISO image since it is already attached to the host.
- Recommended Response Action
- ISO Image is already attached to the host server. Detach the ISO and then rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD56
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An ISO is already connected using Remote File Share (RFS).
- Detailed Description
- An ISO is already connected using Remote File Share (RFS). The connection might have been initiated from iDRAC GUI, racadm, or Remote Services API.
- Recommended Response Action
- Disconnect the Remote File Share (RFS) using iDRAC GUI, racadm, or Remote Services API and then retry the operation to connect the ISO again.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD57
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Remote File Share (RFS) is in Auto-Attach mode.
- Detailed Description
- Remote File Share (RFS) is currently configured to be in auto-attach mode. For Web services to attach an ISO, RFS should be changed to attach mode.
- Recommended Response Action
- Change the Remote File Share (RFS) mode to Attach using iDRAC GUI or Remote Services API and retry.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD58
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect an ISO using Remote File Share (RFS).
- Detailed Description
- The connect ISO operation using Remote File Share (RFS) did not complete successfully.
- Recommended Response Action
- Verify all the parameters are correct. If the problem persists. then reset iDRAC and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD59
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to disconnect from ISO using Remote File Share (RFS).
- Detailed Description
- Disconnecting ISO using Remote File Share (RFS) operation did not complete successfully.
- Recommended Response Action
- Reset iDRAC and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD6
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot allocate memory.
- Detailed Description
- Unable to dynamically allocate memory to perform the task.
- Recommended Response Action
- Reset iDRAC and run the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD60
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- ISO image is not connected using Remote File Share (RFS).
- Detailed Description
- ISO image is not connected using Remote File Share (RFS).
- Recommended Response Action
- Verify ISO is connected using Remote File Share (RFS) and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD61
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- IP Address format is invalid.
- Detailed Description
- The IP Address format is invalid and cannot be validated. The specified IP address may not be a valid IPv4 or IPv6 address.
- Recommended Response Action
- Verify the IP address format and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD62
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to run the command because an invalid firmware image file name is entered.
- Detailed Description
- The command cannot be run because an invalid firmware image file name is entered.
- Recommended Response Action
- Make sure that a valid firmware image file is entered. The file must not contain any file path components such as forward slash (/) or period (.).
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD63
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to run the DetachDrivers invoke method because the driver files are not attached.
- Detailed Description
- The DetachDrivers invoke method cannot be run because the driver files are not attached.
- Recommended Response Action
- No response action required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD64
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the ConfigurableBootToNetworkISO method by specifying the ResetType parameter as warm reboot because the server is in turned-off state.
- Detailed Description
- The ConfigurableBootToNetworkISO method cannot be run by specifying the ResetType parameter as warm reboot because the server is in turned-off state.
- Recommended Response Action
- Make sure that the server is turned on and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD65
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The ISO file is successfully attached. The next host reboot is scheduled to boot to the ISO file.
- Detailed Description
- The ISO file is successfully attached. The next host reboot is scheduled to boot to the ISO file.
- Recommended Response Action
- No response action required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD66
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter OSName is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter OSName is missing.
- Recommended Response Action
- Provide the missing parameter "OSName" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD67
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter IPAddress is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter IPAddress is missing.
- Recommended Response Action
- Provide the missing parameter "IPAddress" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD68
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ShareName is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ShareName is missing.
- Recommended Response Action
- Provide the missing parameter "ShareName" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD69
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ShareType is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ShareType is missing.
- Recommended Response Action
- Provide the missing parameter "ShareType" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD7
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve Lifecycle Controller handle.
- Detailed Description
- Unable to connect to Lifecycle Controller because of an existing open connection or an internal error.
- Recommended Response Action
- Reset iDRAC, and rerun the command to correct the problem.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD70
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter UserName is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter UserName is missing.
- Recommended Response Action
- Provide the missing parameter "UserName" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD71
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter Password is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter Password is missing.
- Recommended Response Action
- Provide the missing parameter "Password" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD72
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ImageName is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ImageName is missing.
- Recommended Response Action
- Provide the missing parameter "ImageName" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD73
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter HashValue is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter HashValue is missing.
- Recommended Response Action
- Provide the missing parameter "HashValue" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD74
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ShareType is invalid.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ShareType is invalid.
- Recommended Response Action
- Check the value provided for input parameter "ShareType" and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD75
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter HashType is invalid.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter HashType is invalid.
- Recommended Response Action
- Check the value provided for input parameter "HashType" and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD76
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ResetType is invalid.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ResetType is invalid.
- Recommended Response Action
- Check the value provided for input parameter "ResetType" and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD77
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to invoke the method because the mandatory input parameter ResetType is missing.
- Detailed Description
- The method cannot be invoked because the mandatory input parameter ResetType is missing.
- Recommended Response Action
- Provide the missing parameter "ResetType" in the method invocation and retry the operation.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD78
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Drivers of the selected Operating System (OS) are successfully attached to the server.
- Detailed Description
- Drivers of the selected Operating System (OS) are successfully attached to the server. Drivers are now ready for use during the OS installation.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD79
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The BIOS has successfully initiated the boot operation to the ISO file so that the OS installation can be started.
- Detailed Description
- The BIOS has successfully initiated the boot operation to the ISO file so that the OS installation can be started.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD8
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Setting Boot to PXE through IPMI failed.
- Detailed Description
- The BIOS boot order set to PXE using a standard IPMI command has failed.
- Recommended Response Action
- 1) Check BIOS PXE settings. 2) Rerun the command. 3) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD80
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to boot to ISO image because of Secure Boot policy.
- Detailed Description
- Unable to boot to ISO image because of Secure Boot policy.
- Recommended Response Action
- If the Secure Boot feature is not desired, disable it in System Setup > System BIOS > Security Settings page. Otherwise, do the following: 1) review the Secure Boot Policy Summary in F2 System Setup > System BIOS > Security Settings page. The boot option must be authorized by a public key or hash value in the Authorized Signature Database. 2) If the boot option is not authorized but it can be trusted, enter System Setup > System BIOS > Security Settings page, set Secure Boot Policy to Custom, and add a entry for the boot option in the Authorized Signature Database (System Setup > System BIOS > Security Settings > Custom Policy Settings > Authorized Signature Database > Import Database Entry).
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD81
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- OSD81: The ExposeDuration of arg1 seconds has expired, and the ISO and/or DriverPack have been successfully detached.
- Arguments
- arg1 = value
- Detailed Description
- The set duration (ExposeDuration) for the ISO and/or DriverPack operation has expired and has been detached from the system.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD82
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to boot to the ISO image file because the server was explicitly powered off.
- Detailed Description
- The server cannot be booted to the ISO image file because the server was explicitly powered off.
- Recommended Response Action
- Make sure server stays powered on while it completes booting to the ISO image file.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD83
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Running ISO hash verification.
- Detailed Description
- A hash verification of the ISO has been requested and is currently in progress. Please allow up to an hour for the operation to complete.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
OSD9
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Failed to reboot the system using an IPMI command.
- Detailed Description
- Resetting the targeted server using the standard IPMI command has failed.
- Recommended Response Action
- 1) Rerun the command. 2) Reset iDRAC and rerun the command.
- Category
- Configuration (OSD = OS Deployment)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\