PowerEdge Servers Error and Event Messages Reference Guide
SPDM—Security Protocol and Data Model Event Messages
SPDM0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 is not supporting the following claimed capability: arg2.
- Arguments
- arg1 = FQDD
- arg2 = capabilityName
- Detailed Description
- The device identified in the message does not support its claimed capability.
- Recommended Response Action
- Do the following: 1) Upgrade the device firmware to the latest version. 2) Restart iDRAC. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 provided an invalid certificate because arg2.
- Arguments
- arg1 = FQDD
- arg2 = Reason
- Detailed Description
- The device identified in the message provided an invalid certificate.
- Recommended Response Action
- Do the following: 1) Upgrade the device firmware to the latest version. 2) Restart iDRAC. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC is unable to authenticate the device arg1 because arg2.
- Arguments
- arg1 = FQDD
- arg2 = Reason
- Detailed Description
- iDRAC is unable to authenticate the device identified in the message.
- Recommended Response Action
- Do the following: 1) Upgrade the device firmware to the latest version. 2) Restart iDRAC. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC is unable to match with the capabilities of device arg1.
- Arguments
- arg1 = deviceFQDD
- Detailed Description
- The Security Protocol and Data Model (SPDM) capabilities of the device are not matching with the capabilities supported by iDRAC.
- Recommended Response Action
- Do the following: 1) Upgrade the device firmware to the latest version. 2) Restart iDRAC. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An incorrectly formed message is provided by the device arg1.
- Arguments
- arg1 = deviceFQDD
- Detailed Description
- An incorrectly formed message is displayed by the device identified in the message.
- Recommended Response Action
- Do the following: 1) Upgrade the device firmware to the latest version. 2) Restart iDRAC. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC is unable to attest the device arg1.
- Arguments
- arg1 = device_FQDD
- Detailed Description
- iDRAC is unable to attest the device identified in the message as its attestation data is not verifiable.
- Recommended Response Action
- No response action is required.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
SPDM0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 is attested.
- Arguments
- arg1 = FQDD
- Detailed Description
- The device identified in the message is attested. However, the Root Certificate is not validated because Root of Trust (RoT) is unavailable.
- Recommended Response Action
- No response action is required.
- Category
- System Health (SPDM = Security Protocol and Data Model)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\