
Dell DL4000 Appliance Deployment Guide
Available configurations
The DL 4000 comes in two configurations: Standard Edition and High Capacity Edition.
| Capacity | Hardware Configuration |
|---|---|
| 5TB | DL4000 with Internal Storage Only |
| 10TB | DL4000 with Internal Storage and 1 x MD1200 with 12 x 1TB Drives |
| 20TB | DL4000 with Internal Storage and 1 x MD1200 with 12 x 2TB Drives |
| 40TB | DL4000 with Internal Storage and 1 x MD1200 with 12 x 4TB Drives |
| Capacity | Hardware Configuration |
|---|---|
| 20TB | DL4000 with Internal Storage and 1 x MD1200 with 12 x 2TB Drives |
| 40TB | DL4000 with Internal Storage and 1 x MD1200 with 12 x 4TB Drives |
| 60TB | DL4000 with Internal Storage and 2 x MD1200
OR
|
| 80TB | DL4000 with Internal Storage and 2 x MD1200
|
NOTE: All models
except for the Standard Edition 5TB model use the internal storage
on the DL4000 for VM storage, archive storage, or other scratch space.
NOTE: Additional storage
can be added through expansion shelves (Dell PowerVault MD1200). Additional
storage can be added to any model, however the Standard Edition has
a maximum capacity of 40TB and the High Capacity Edition has a maximum
capacity of 80TB. Both editions allow for up to a maximum of four
expansion shelves.
Each configuration includes
the following hardware and software:
- Dell DL4000 system
- Dell PowerEdge RAID Controllers (PERC)
- Preinstalled operating system and Dell OpenManage system and storage management software
- AppAssure software
NOTE: If your
appliance configuration does not include PowerVault MD1200 storage
enclosures, ignore any references to PowerVault MD1200 and storage
enclosures in this document.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\