Dell Precision 5520 Owner's Manual

Removing the Display Assembly

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
   1. Base cover
   2. battery
3. Perform the following steps:
   1. Remove the screw securing the metal bracket [1].
   2. Lift the metal bracket off the computer [2].
   3. Disconnect the LVDS cable from the system board [3].
   
4. Place the computer at the edge of a table as shown and remove the six M2.5x5 screws [1] securing the display assembly to the computer. Then, lift the display assembly off the computer [2].