Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Precision 5820 Tower Owner's Manual

Installing the NVMe flexbay

  1. To install the SSD in the carrier:
    1. NOTE:NVMe Flexbay uses a SSD backplane and drop cables for installing the SSDs. HDD backplane is not compatible with the NVMe flexbay.
      Remove the dummy SSD blank from the SSD carrier.
      Remove dummy SSD blank
    2. Peel off the tape from the SSD carrier.
      Remove the protective film
    3. Peel off the adhesive tape from the SSD carrier cover.
      Remove protective film
  2. Install the SSD in the carrier
    Insert the SSD.
  3. Replace the two side screws and the central screw.
  4. To install the SSD carrier slide the carrier in the NVMe flexbay until it clicks in place.
  5. Slide the carrier into the drive bay until it clicks into place.
    CAUTION:Ensure that the latch is open before installing the carrier.
  6. Lock the latch.
  7. Install the following components:
    1. HDD bezel
    2. side cover
  8. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\