Admin Password |
Allows you to set, change, or delete the administrator(admin) password. The entries to set password are: - Enter the old password:
- Enter the new password:
- Confirm new password:
Click OK once you set the password. NOTE:For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
System Password | Allows you to set, change, or delete the System password. The entries to set password are: - Enter the old password:
- Enter the new password:
- Confirm new password:
Click OK once you set the password. NOTE:For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
Internal HDD-0 Password | Allows you to set, change, or delete the password on the system's internal hard disk drive (HDD). The entries to set password are: - Enter the old password:
- Enter the new password:
- Confirm new password:
Click OK once you set the password. NOTE:For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password. |
Strong Password | Allows you to enforce the option to always set strong password. This option is not set by default. |
Password Configuration |
You can define the length of your password. Min
= 4, Max = 32 |
Password Bypass |
Allows you to bypass the System password and the Internal HDD password, when it is set, during a system restart. Click one of the options:
- Disabled—Default
- Reboot bypass
|
Password Change |
Allows you to change
the System password when the administrator password is set. - Allow Non-Admin Password Changes
This option is set by default. |
UEFI Capsule Firmware Updates | Allows you to update the system BIOS via UEFI capsule update packages. - Enable UEFI Capsule Firmware Updates
This option is set by default. |
TPM 1.2 Security |
Allows you to enable or disable the Trusted Platform Module
(TPM) during POST. The options are: - TPM On(Default)
- Clear
- PPI Bypass for Enable Commands
- PPI Bypass for Disable Commands
Click any one of the following: |
Computrace (R) |
Allows you to activate or disable the optional
Computrace software. The options are:
- Deactivate—Default
- Disable
- Activate
|
Chassis Intrusion | Allows you to control the chassis intrusion feature. Click one of the following options: - Disabled—Default
- Enabled
- On-Silent
|
CPU XD Support |
Allows you to enable the Execute Disable mode
of the processor. This option is set by default. |
OROM Keyboard Access |
Allows you to determine whether users are able
to enter the Option ROM Configuration screens via hotkeys during boot.
The options are: Click one of the following options:
- Enabled—Default
- One Time Enable
- Disabled
|
Admin Setup Lockout |
Allows you to prevent users from entering Setup
when an administrator password is set.
- Enable Admin Setup Lockout
This option is not set by default. |
Master Password Lockout | Allows you to disable master password support. - Enable Master Password Lockout
This option is not set by default. NOTE:Hard Disk password should be cleared before the settings can be changed. |