Dell Precision 7920 Tower Owner's Manual

Installing the NVMe flexbay

1. To install the SSD in the carrier:
   1. NOTE:NVMe Flexbay uses a SSD backplane and drop cables for installing the SSDs. HDD backplane is not compatible with the NVMe flexbay.
      Remove the dummy SSD blank from the SSD carrier.
      
   2. Peel off the tape from the SSD carrier.
      
   3. Peel off the adhesive tape from the SSD carrier cover.
      
2. Install the SSD in the carrier
   
3. Replace the two side screws and the central screw.
4. To install the SSD carrier slide the carrier in the NVMe flexbay until it clicks in place.
5. Slide the carrier into the drive bay until it clicks into place.
   CAUTION:Ensure that the latch is open before installing the carrier.
6. Lock the latch.
7. Install the following components:
   1. HDD bezel
   2. side cover
8. Follow the procedure in After working inside your computer.