Dell RecoverPoint for Virtual Machines 6.0.1 Installation and Deployment Guide

Modify the network topology

Use this procedure to modify the existing network topology.

1. Pause transfer between the production and copies of the consistency groups for the vRPA cluster that you are modifying.
2. From the vSphere Client or Web Client, add the vNIC on all vRPA VMs. Ensure that the type is VMXNET3.
3. Use an SSH client to log in to the vRPA as the admin user.
   1. Detach the vRPA from the vRPA cluster. From the Main menu, select Cluster operations > Detach RPA from cluster.
   2. From the Main menu, select Setup > Modify settings > Enter cluster details > Network Interface and IPs Configuration.
   3. Select the network topology that you want to use.
      NOTE: If applicable, modify the port group using the vSphere client as needed.
   4. Attach the vRPA back to the cluster. From the Main menu, select Cluster operations > Attach RPA to cluster.
4. Repeat step 3 for each vRPA in the vRPA cluster.
5. Start transfer between the production and copies of the consistency groups for the modified vRPA cluster.