To manage and monitor Dell EMC devices by using the SCOM console, you must first enroll the Management Server in the All Management Server Resource Pool (AMSRP) of the Management Group to OMIMSSC. To enroll Management Server(s) with OMIMSSC, do the following:
On a web browser, provide the OMIMSSC appliance IP address and log in as an OMIMSSC ADMIN user.
In the left pane, click
Settings > Console Enrollment.
In the working pane, click
Enroll.
In the
Enroll a Microsoft System Center Operations Manager Console dialog box:
Enter the SCOM console name that you want to enroll (associate) with the OMIMSSC appliance.
In the
Name and
Description boxes, enter the console name and description.
In the
Server FQDN box, enter the FQDN of any management server.
From the
Credentials drop-down menu, select a Windows credential profile.
To verify the connection between OMIMSSC and SCOM, click
Test Connection.
Wait for some time. If successfully connected, the following message is displayed:
Test connection is successful.
Click
Enroll.
The management server with the SCOM console is successfully enrolled to the OMIMSSC appliance and listed on the
Console Enrollment page.
Wait for some time. It may take 10−15 minutes for all the OMIMSSC—related management packs to get imported into the SCOM console. Event ID 71 is generated. See the OMIMSSC logs for information on the configuration changes.
To troubleshoot any issues during or after the enrollment, see the
Troubleshooting section in the user's guide.
If the SCOM Management Group consists of a custom resource pool, ensure to host the Proxy MS on the MS belonging to the custom resource pool.
If there are multiple management servers within the management group, this process enrolls all the management servers within that management group. If a management server has been added to or deleted from the management group, synchronize the OMIMSSC data with the SCOM console. See
View and refresh data about SCOM consoles enrolled to OMIMSSC.
The Dell EMC OpenManage Integration Dashboard link is displayed under the
Monitoring > Dell EMC > Dell EMC OpenManage Integration View pane of the SCOM console. You can now start discovering and monitoring your devices by using the Dell EMC OpenManage Integration Dashboard or though the SCOM console.
WARNING Before you try to enroll consoles (in a management group) to a different OMIMSSC appliance, ensure that you de-enroll them from the current appliance. Wait till the devices in the Dell EMC views are cleared and management packs are removed from the SCOM console, and then retry the operation. Time taken for this operation might vary depending on the number of devices and the selected mode.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\