Dell Storage Center SCv2000 and SCv2020 Storage System Deployment Guide

The Set System Information page allows you to enter Storage Center and storage controller configuration information to use when connecting to the Storage Center using Dell Storage Manager Client .

1. Type a descriptive name for the Storage Center in the Storage Center Name field.
2. Type the system management IPv4 address for the Storage Center in the Virtual Management IPv4 Address field. The management IPv4 address is the IP address used to manage the Storage Center and is different from a storage controller IPv4 address.
3. Type an IPv4 address for the management port of each storage controller.
   • NOTE: The storage controller IPv4 addresses and management IPv4 address must be within the same subnet.
4. Type the subnet mask of the management network in the Subnet Mask field.
5. Type the gateway address of the management network in the Gateway IPv4 Address field.
6. Type the domain name of the management network in the Domain Name field.
7. Type the DNS server addresses of the management network in the DNS Server and Secondary DNS Server fields.
8. Click Next.