SC460 Expansion Enclosure Owner's Manual

To determine which hard drive failed, use Storage Manager.

1. Click the Hardware tab.
2. In the Hardware tab navigation pane, select and expand the Storage Center.
3. In the Hardware Alerts area, find the hardware alert that identifies the expansion enclosure with the failed hard drive.
   Figure 1. Hardware Alert Identifying the Expansion Enclosure with the Failed Hard Drive
   
   

   

   
   
   
4. In the Hardware tab navigation pane, expand the expansion enclosure identified in the previous step.
5. Select Disks. The status of each disk is displayed in the Disks tab.
6. Select the failed hard drive. The location of the failed hard drive is displayed in the Disk View tab.
   Figure 2. Disk View Showing the Failed Hard Drive