Storage Center 7.3 Release Notes

Open Issues Related to Vendors

The following open issues are related to vendors:

Table 1. Open Vendor IssuesVendor open issues
Issue	Description
SQAI-9	An ESXi 5.5 (Update 3b) host using FCoE and QLogic 8262 converged network adapters (CNAs) might cause the host to fail during controller failovers. Workaround: Update the QLogic firmware on the adapter. The QLogic firmware is available at https://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=6RGDW.
SQAI-3	Software FCoE timeouts might occur when using CNAs in NIC mode. Workaround: Update the QLogic firmware on the adapter. The QLogic firmware is available at https://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=6RGDW
SQAI-2	An ESXi 5.5 or 6.0 host with an Emulex FC/FCoE HBA running driver version 11.0.x.x might crash during a controller failover. Workaround: Update to the latest Dell custom images of ESXi 5.5, 6.0, or 6.5.
SQAI-1	Fibre-Channel boot from SAN does not work with Emulex LPe12002 boot code version 7.00a2 and the Linux servers RHEL 6.8, SLES 12, and XenServer 7.0. Workaround: Update to Emulex 12002 boot code version 11.20a8 or later.
SCOS-27133	Server bandwidth to the onboard 10 Gb Ethernet ports on an SC7020 drops significantly on reads when the server iSCSI initiator has interrupt moderation set to default (enabled). Workaround: From the server, disable interrupt moderation on the iSCSI cards as described in Dell EMC SC Series Storage: Microsoft Multipath I/O Best Practices.
CVSE-3	Storage Center 7.3.1 and 7.3.2 does not support Commvault Simpana Backup. Workaround: None