SupportAssist Enterprise Version 2.0.60 Support Matrix

PDF

Supported Dell Force10 devices

Remote monitoring and case creation are supported only if SNMP settings are configured on the networking device. SupportAssist Enterprise does not support the configuration of SNMP settings on the networking device. Therefore, you must manually configure the SNMP settings on the networking device.

The following table lists the supported Dell Force10 devices:

Table 1. Supported Dell Force10 devicesThe following table lists the supported Dell Force10 devices.
Dell Force10 devices	Remote monitoring and case creation	Automatic collection of system information	Collection protocol	Port used	Latest supported firmware version
C150	Yes	Yes	SSH2	22	8.4
C300	Yes	Yes	SSH2	22	8.4
E1200i ExaScale	Yes	Yes	SSH2	22	8.4
E300	Yes	Yes	SSH2	22	8.4
E600 TeraScale	Yes	Yes	SSH2	22	8.4
E600i ExaScale	Yes	Yes	SSH2	22	8.4
MXL 10/40 GbE	Yes	Yes	SSH2	22	9.3
S25 24P	Yes	Yes	SSH2	22	8.2.1
S25 24T	Yes	Yes	SSH2	22	8.2.1
S25 24V	Yes	Yes	SSH2	22	8.2.1
S25N	Yes	Yes	SSH2	22	8.2.1
S4810 and S4820T	Yes	Yes	SSH2	22	9.3
S50 - 48T	Yes	Yes	SSH2	22	8.2.1
S50 - 48TV	Yes	Yes	SSH2	22	8.2.1
S50N	Yes	Yes	SSH2	22	8.2.1
S50P	Yes	Yes	SSH2	22	8.2.1
S55	Yes	Yes	SSH2	22	8.3
S55T	Yes	Yes	SSH2	22	8.2.1
S60	Yes	Yes	SSH2	22	8.3
S60 - 44T	Yes	Yes	SSH2	22	8.3.3
Z9000	Yes	Yes	SSH2	22	9.3