Dell Unity™ Family VNX® Series Data Import to Unity All Flash or Hybrid, or UnityVSA™ System User Guide

PDF

View import sessions for block

View details about import sessions for block. You can filter on the session ID.

Format

/import/session/block [{-id <value> | -active | -completed | -cancelled}] show

Object qualifier

Qualifier	Description
-id	Type the ID of the import session.
-active	Show only active sessions (sessions that are not completed or cancelled).
-completed	Show only completed sessions.
-cancelled	Show only cancelled sessions.

Example

The following command displays block import sessions on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/block show -detail

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                                   = import_2
      Name                                 = VNX LUN Group 1 import
      Session type                         = block
      Health state                         = OK (5)
      Health details                       = "This import session 
is operating normally. No action is required."
      State                                = Syncing
      Progress                             = 0%
      Source system                        = RS_65535
      Source resource                      = LUNGroup1
      Target resource                      = res_1
      Estimated remaining bytes            = 47185920 (45 M)   
      Percent remaining for import         = 6
      Cutover threshold percent            = 5
      Throttle                             = no