Dell Unity™ Family VNX® Series Data Import to Unity All Flash or Hybrid, or UnityVSA™ System User Guide

View import sessions for file

View details about import sessions for file. You can filter on the session ID.

Format

/import/session/nas [{-id <value> | -active | -completed | -cancelled}] show

Object qualifier

QualifierDescription
-idType the ID of the import session.
-active Show only active sessions (sessions that are not completed or cancelled).
-completed Show only completed sessions.
-cancelled Show only cancelled sessions.

Example

The following command displays file import sessions on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /import/session/nas show -detail
Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                                                               = import_1
      Type                                                             = cifs
      Name                                                             = test1
      Health state                                                     = OK (5)
      Health details                                                   = "The import session is operating normally."
      State                                                            = Cancelled
      Progress                                                         =
      Source system                                                    = RS_65536
      Source resource                                                  = vdm_cifs_frank
      Source import interface                                          = nas_migration_frank
      Source file systems imported as VMware datastore                 =
      Source file systems imported with compression enabled            =
      Source file systems imported with data reduction enabled         =
      Source file systems imported with advanced deduplication enabled =
      Target resource                                                  = nas_1
      Target resource pool                                             = pool_1
      Target file system to pool mapping                               = res_10~res_11:pool_1
      Target file system access policy mapping                         = 
      Target import interface                                          = if_5
      Target default production port                                   = spa_iom_0_eth0
      Target production interface to port mapping                      = if_6:spa_iom_0_eth0
      Target production interface to vlan mapping                      = if_6:0
      CIFS local user                                                  = Administrator
      Source DHSM user                                                 =

2:    ID                                                               = import_3
      Type                                                             = Multiprotocol
      Name                                                             = test2
      Health state                                                     = OK (5)
      Health details                                                   = "The import session is operating normally."
      State                                                            = Cancelled
      Progress                                                         =
      Source system                                                    = RS_65536
      Source resource                                                  = vdm_test
      Source import interface                                          = nas_migration_test1
      Source file systems imported as VMware datastore                 =
      Source file systems imported with compression enabled            =
      Source file systems imported with data reduction enabled         =
      Source file systems imported with advanced deduplication enabled =
      Target resource                                                  = nas_2
      Target resource pool                                             = pool_1
      Target file system to pool mapping                               = res_12~res 13:pool_1
      Target file system access policy mapping                         = 1400:UNIX; 174:WINDOWS
      Target import interface                                          = if_5
      Target default production port                                   = spa_iom_0_eth0
      Target production interface to port mapping                      = if_7:spa_iom_0_eth0
      Target production interface to vlan mapping                      = if_7:0
      CIFS local user                                                  = Administrator
      Source DHSM user                                                 =

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\