Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Vostro 3400 Setup and specifications guide

System configuration

Table 1. System configurationThe table describes the boot configuration options.
Option Description
Date/Time
The options are:
  • Date
  • Time
NOTE Legacy Boot mode is not supported on this platform.
Network Controller Configurator
Integrated NIC:
  1. Disabled
  2. Enabled
  3. Enabled with PXE
Enable UEFI Network Stack:
  1. On
  2. Off
Storage Interface
Port Enablement - Allows the user to enable/disable onboard drives. The user can toggle on/off for the following drives:
  • SATA-0
  • M.2 PCIe SSD-0/SATA-2
SATA Operation
Allows the user to set the SATA operation mode for the storage devices available. The options available are as follows:
  • Disabled
  • AHCI
  • RAID On
Drive Information

This section displays the driver configuration and specification for all storage devices available.

Enable Audio
Allows the user to enable internal audio devices. The options available are as follows:
  • Enable Microphone
  • Enable Internal Speaker
USB Configuration
Allows the user to enable USB Boot devices. The options available are as follows:
  • Enable USB Boot Support
  • Enable External USB Ports
Miscellaneous Devices
Allows the user to enable internal Camera. The options available are as follows:
  • Enable Camera
Keyboard Illumination
Allows the user to configure the keyboard brightness levels. The options available are as follows:
  • Disabled
  • Dim
  • Bright

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\