Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Vostro 3405 Service Manual

PDF

System diagnostic lights

Battery-status light

Indicates the power and battery-charge status.

Solid white — Power adapter is connected and the battery has more than 5 percent charge.

Amber — Computer is running on battery and the battery has less than 5 percent charge.

Off
  • Power adapter is connected and the battery is fully charged.
  • Computer is running on battery and the battery has more than 5 percent charge.
  • Computer is in sleep state, hibernation, or turned off.

The power and battery-status light blinks amber along with beep codes indicating failures.

For example, the power and battery-status light blinks amber two times followed by a pause, and then blinks white three times followed by a pause. This 2,3 pattern continues until the computer is turned off indicating no memory or RAM is detected.

The following table shows different power and battery-status light patterns and associated problems.

Table 1. LED codesLED light codes for component issues/failure in the product.
Diagnostic light codes Problem description Recommended solutions
2,1 Processor failure Run the CPU diagnostics tool. If problem persists, replace the system board.
2,2 System board: BIOS or ROM (Read-Only Memory) failure Flash latest BIOS version. If problem persists, replace the system board.
2,3 No memory or RAM (Random-Access Memory) detected Confirm that the memory module is installed properly. If problem persists, replace the memory module.
2,4 Memory or RAM (Random-Access Memory) failure Reset and swap memory modules amongst the slots. If problem persists, replace the memory module.
2,5 Invalid memory installed Reset and swap memory modules among the slots. If problem persists, replace the memory module.
2,6 System-board or chipset error Flash latest BIOS version. If problem persists, replace the system board.
2,7 Display failure Flash latest BIOS version. If problem persists, replace the system board.
3,1 Coin-cell battery failure Reset the CMOS battery connection. If problem persists, replace the RTC battery.
3,2 PCI, video card/chip failure Replace the system board.
3,3 Recovery image not found Flash latest BIOS version. If problem persists, replace the system board.
3,4 Recovery image found but invalid Flash latest BIOS version. If problem persists, replace the system board.
3,5 Power-rail failure EC ran into power sequencing failure. If problem persists, replace the system board.
3,6 System BIOS Flash incomplete Flash corruption detected by SBIOS. If problem persists, replace the system board.
3,7 Management Engine (ME) error Timeout waiting on ME to reply to HECI message. If problem persists, replace the system board.

Camera status light: Indicates whether the camera is in use.

  • Solid white — Camera is in use.
  • Off — Camera is not in use.

Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.

  • Solid white — Caps Lock enabled.
  • Off — Caps Lock disabled.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\