Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Vostro 3583 Service Manual

Installing the display assembly

About this task

NOTE: : Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest and keyboard assembly.

Steps

  1. Align and place the palmrest and keyboard assembly under the hinges on the display assembly [1].
  2. Seat the palmrest and keyboard assembly on the display assembly [2].
  3. Press the hinges down on the system board, and palmrest and keyboard assembly [3].
    Image: Seat the palmrest and keyboard assembly
  4. Replace the five (M2.5x5) screws that secure the left and right hinges to the system board, and palmrest and keyboard assembly [1].
    Image: Replace the screws.
  5. Route the display cable through the routing guides on the palmrest and keyboard assembly [1].
  6. Connect the display cable to the connector on the system board [2].
  7. Affix the antenna cables to the system board [3].
    Image: Routing the display cable and antenna cables

Next steps

  1. Replace the WLAN
  2. Connect the battery cable to the connector on the system board.
  3. Replace the base cover
  4. Replace the SD memory card
  5. Follow the procedure in after working inside your computer

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\