Dell Vostro 3670 Setup and specifications guide

Security screen options

Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.

Default setting: Not set

System Password
Allows you to set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.

Default setting: Not set

Internal HDD-0 Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.

Default Setting: Not set

Internal HDD-3 Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.

Default Setting: Not set

Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.

Default setting: Allow Non-Admin Password Changes is selected.

UEFI Capsule Firmware Update
This option controls whether the system allows the BIOS updates through UEFI capsule update packages. This option is enabled by default.
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
  • TPM On (enabled by default)
  • Clear
  • PPI Bypass for Enabled Commands
  • PPI Bypass for Disabled Commands
  • PPI Bypass for Clear Command
  • Attestation Enable (enabled by default)
  • Key Storage Enable (enabled by default)
  • SHA-256 (enabled by default)
  • Disabled
  • Enabled (enabled by default)
NOTE: To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Computrace
Allows you to activate or disable the optional Computrace software The options are:
  • Deactivate
  • Disable
  • Activate
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes are allowed

Default setting: Deactivate

Master Password Lockout
The option Enable Master Password Lockout is not selected by default.
SIMM Security Mitigation
Allows you to enable or disable the additional UEFI SIMM Security Mitigation protections.

Default Setting: SIMM Security Mitigation is not selected.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\