Dell VxRail Architecture Overview

PDF

Array-based storage

VxRail dynamic nodes support PowerStore, PowerMax, PowerFlex, and Dell Unity XT. These arrays support storage protocols such as FC, iSCSI, NFS, and NVMe. These arrays support LUNs, vVols, and NFS storage types.

For more information about requirements and the supported storage types on various arrays, see Dell VxRail 8.0.x Support Matrix and Dell VxRail 7.0.x Support Matrix.

Table 1. Minimum VxRail release for external primary storage options for VxRail 7.0.xThe following table lists the minimum supported external primary storage options for VxRail 7.0.x.
Storage protocol	Storage type	Minimal VxRail version
Storage protocol	Storage type	> or =7.0.400	7.0.350	7.0.300	7.0.240
FC	VMFS	X	X	X	X
FC	vVols	X	—	—	—
FC-NVMe	VMFS	X	—	—	—
VC-NVMe	vVols	X	—	—	—
iSCSI	VMFS	X	X	—	—
iSCSI	vVols	X	—	—	—
NFS	File System	X	X	—	—
NFS	vVols	X	—	—	—
NVMe/TCP/IP	VMFS	X	—	—	—
NVMe/TCP/IP	vVols	—	—	—	—
PowerFlex	VMFS	X	X	X	—
VMware vSAN	VMware vSAN Cross-Cluster Capacity Sharing	X	X	X	X

Table 2. Minimum VxRail release for primary storage options for VxRail 8.0.xThe following table lists the minimum supported external primary storage options for VxRail 8.0.x.
Storage protocol	Storage type	8.0.000/8.0.x
FC	VMFS	X
FC	vVols	X
FC-NVMe	VMFS	X
FC-NVMe	vVols	X
iSCSI	VMFS	X
iSCSI	vVols	X
NFS	File System	X
NFS	vVols	X
NVMe/TCP/IP	VMFS	X
NVMe/TCP/IP	vVols	—
PowerFlex	VMFS	X
VMware vSAN	VMware vSAN Cross-Cluster Capacity Sharing	X