Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

PDF

INI parameters

The following table provides the list of INI parameters:

NOTE: Every INI parameter is associated with a parent INI parameter. Use these INI parameters along with the corresponding parent INI parameters. For more information about the newly added INI parameters, see the Dell Wyse ThinOS 8.6 INI Reference Guide at www.dell.com/support.

Table 1. INI parametersINI parameters
INI parameters	Description
SessionConfig=RDP [desktopmode={fullscreen, window}]	This parameter is only available for the RDP desktops that are published in the VMware Broker agent. The default is fullscreen mode for an RDP desktop.
SignOn={yes, no, NTLM} [EnableMessage={yes, no}]	EnableMessage addresses the issue- PSRC-12979. It is used to display the security warning message on the signon window based on the FileServer path. The default is yes. A warning message is displayed on top of the signon window when FTP/HTTP is configured on the FileServer path otherwise no message is displayed.
Device=Wireless [WlanFnKeyDisable={0,1}]	The default value is 0. This parameter is used to disable the Fn+PrtScr key in a wireless connection. It is only available for Wyse 5470 Mobile Thin Client.
[PowerFnKeyDisable={0,1}]	The default value is 0. This parameter is used to disable the Fn+Insert key. It is only available for Wyse 5470 Mobile Thin Client.
[ClassicModeAppsEnable={0,1}]	The default value is 0. This parameter is used to display the Published applications which has the Keyword Mandatory property set. It is only available for the Citrix Broker agent in classic mode.
Device=Wireless [DeleteWirelessProfile={0,1}]	The default value is 0. This parameter is used to delete the specified wireless profile from the NVRAM. For example- device=wireless SSID=ThinOS DeleteWirelessProfile=yes will delete the ThinOS SSID from the NVRAM if configured.
ConnectionBroker={default, VMware, Microsoft, Quest, AWS} [EnableAWSREGCode={yes,no}]	This option enables or disables the ability to change the registration code for connection to AWS. If the value is set to yes, you can modify the registration code for connecting to AWS by the logon window. If set to no, the registration code field will be disabled and if this INI is not defined then the broker server or registration code can be entered manually from the GUI.