Dell Wyse ThinOS 9.1.3129, 9.1.3112, 9.1.2101, and 9.1.1131 Administrator’s Guide

Configure the Citrix UPD printer

Use of Citrix Universal Print Driver (Citrix UPD) ensures that all printers that are connected to the thin client can also be used from a virtual desktop or application session without integrating a new printer driver in the data center. Citrix UPD is the base of Citrix Universal Printer. It is an autocreated printer object that uses the Citrix UPD and is not tied to any specific printer defined on the client.

1. Connect a printer to the ThinOS client.
2. On the ThinOS desktop menu, do the following:
   1. Open the Connection Manager window.
   2. Click Global Connection Settings.
   3. Go to the Session tab and select the Exclude printer devices check box.
   4. Click OK.
3. From the desktop menu, click System Setup > Printer Setup.
   The Printer Setup dialog box is displayed.
4. Enter the name of the printer in the Printer Name box.
5. Enter any string of the Printer identification in the Printer Identification box.
6. Select the type of the printer class from the drop-down list, select the check box to enable the printer device, and click OK.
   NOTE:In ThinOS 9.1, only PS class is supported.
7. Start a Citrix Virtual Apps and Desktops application connection.
8. Open the Devices and Printers in the desktop or application. The printer is mapped as the UPD printer by default.