Dell Wyse ThinOS 9.1.3129, 9.1.3112, 9.1.2101, and 9.1.1131 Administrator’s Guide

Configure the Identity Automation

1. From the desktop menu, click System Setup > Remote Connections .
   The Remote Connections dialog box is displayed.
2. Click the Authentication tab, and select the Authentication Type as Identity Automation.
3. In the Identity Automation Server field, enter the Fully Qualified Domain Name (FQDN) for your Identity Automation Lynx server. By default, port 443 is used. However, you can specify a different port by adding a colon and the port number to the end of the FQDN. For example, server1.mycompany.com:5000. In this example, the specified server FQDN and port 5000 on that server are used.
4. In the API Key field, enter the server API key.
   To obtain the API key, do the following:
   1. Log in to the Lynx server web application.
   2. Go to Settings > API.
   3. Click Copy to copy the API key.
5. In the Configuration ID field, enter the configuration ID number that you want the thin client to use. The configuration ID number is associated with a group of settings that you can specify. Log in to your Lynx server as an administrator to specify a group of settings and obtain the configuration ID number.
6. Click OK to save your changes.
7. Connect a supported RFIDeas proximity card reader to the thin client.
8. Restart the thin client.
   The Identity Automation Tap your badge screen is displayed.