Dell Wyse Management Suite Version 3.7 and 3.8 Administrator Guide

Register and configure Dell Generic Client using Wyse Management Suite

1. Log in to the Dell Generic Client running Ubuntu operating system.
2. Open Terminal.
3. Restart the dcae_service using the command systemctl restart dcae.service.
   The DCA-Enabler service tries to manually register the device using the reg.json file that is present in the /etc/dcae/config folder.
   You can also register the devices using any of the following methods:

   • Using DHCP option tags—see Register devices by using legacy DHCP option tags.
   • Using DNS SRV record—see Registering devices by using legacy DNS SRV record.
   • Using secure DNS SRV record and DHCP option tags—see Register devices using DNS SRV record fields or DHCP scope options

   NOTE When the Enrollment Validation option is enabled, the manual or auto-discovered devices are in Enrollment Validation Pending state in the Devices page. The tenant can select a single device or multiple devices in the Devices page and validate the enrollment. The devices are moved to the intended group after they are validated. For more information about how to validate the devices, see Enrollment validation.
4. Log in to Wyse Management Suite.
5. Add or move the device to your wanted group (optional)—see Managing Groups and Configs.
6. Configure the Generic client using any of the following options:
   • Using the Groups and Configs page—see Edit the Dell Generic Client settings.
   • Using the Devices page—see Managing Devices.