Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

XPS 13 9310 Setup and Specifications

Display

The following table lists the display specifications of your XPS 13 9310.

Table 1. Display specifications

The following table provides the detailed display specifications of XPS 13 9310.

Description Option one Option two Option three
Display type

Ultra High Definition (UHD+)

Full High Definition (FHD+)

Full High Definition (FHD+)

Touch options

Yes

Yes

No

Display-panel technology

Wide-Viewing Angle (WVA)

Wide-Viewing Angle (WVA)

Wide-Viewing Angle (WVA)

Display-panel dimensions (active area):
Height

288 mm (11.34 in.)

288 mm (11.34 in.)

288 mm (11.34 in.)

Width

180 mm (7.09 in.)

180 mm (7.09 in.)

180 mm (7.09 in.)

Diagonal

339.60 mm (13.37 in.)

339.60 mm (13.37 in.)

339.60 mm (13.37 in.)

Display-panel native resolution

3840 x 2400

1920 x 1200

1920 x 1200

Luminance (typical)

500 nits

500 nits

500 nits

Megapixels

9.216

2.304

2.304

Color gamut

DCI-P3 90% (typical)

sRGB 100%

sRGB

Pixels Per Inch (PPI)

338.67

169.3

169.3

Contrast ratio (typical)

1200:1

1200:1

1200:1

Response time (max)

35 ms

35 ms

35 ms

Refresh rate

60 Hz

60 Hz

60 Hz

Horizontal view angle

+/- 85 degrees

+/- 85 degrees

+/- 85 degrees

Vertical view angle

+/- 85 degrees

+/- 85 degrees

+/- 85 degrees

Pixel pitch

0.08 mm

0.15 mm

0.15 mm

Power consumption (maximum)

6.60 W

2.90 W

2.90 W

Anti-glare vs glossy finish

Anti-reflective

Anti-reflective

Anti-reflective


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\