XPS 8960 Service Manual
Removing the processor
Prerequisites
- Follow the procedure in Before working inside your computer.
- Remove the left-side cover.
- Remove the fan and heat-sink assembly (65 W) or the fan and heat-sink assembly (125 W) or the fan and heat-sink assembly (125 W, air cooling), whichever is applicable.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
Steps
- Press the release lever down and then push it away from the processor to release it from the securing tab.
- Extend the release lever completely and open the processor cover.
CAUTION:When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.
- Gently lift the processor from the processor socket.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\