XPS 14 DA14260 Service Manual

PDF

Removing the M.2 2230 solid-state drive (SSD)

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the Palm-rest and keyboard assembly.

About this task

NOTE:Depending on the configuration ordered, your computer may support an M.2 2230 SSD or an M.2 2280 SSD.
NOTE:This task applies only to computers shipped with an M.2 2230 SSD.

The following video provides an overview of this task.

Image: Video icon

The following image indicates the location of the M.2 2230 SSD and provides a visual representation of the removal procedure.

Figure 1. Remove the M.2 2230 solid-state drive
Removing the M.2 2230 solid-state drive

Steps

  1. Remove the two screws (M2x3) that secure the M.2 SSD thermal shield to the system board.
  2. Slide and remove the M.2 SSD thermal shield off the system board.
  3. Lift the M.2 2230 SSD bracket off the system board.
  4. Gently lift and slide the M.2 2230 SSD out of the SSD slot.
    CAUTION:When removing the SSD, be careful not to damage or dislodge the thermal pad on the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\