- Notes, cautions, and warnings
- PowerFlex custom node deployment overview
- Revision history
- Product requirements
- Configuring the hardware
- Installing the Linux operating system
- Network architecture and physical connectivity for Linux servers
- Configuring network ports on Linux servers
- Linux ports overview
- Configure network ports on PowerFlex custom node servers
- PowerFlex custom node R650, R750, or R6525 NIC and iDRAC port locations
- PowerFlex custom node R650 port designations - Linux (1*OCP + PCIe slot)
- PowerFlex custom node R6525 port designations - Linux (1*OCP + PCIe slot)
- PowerFlex custom node R750 port designations - Linux (2 PCIe slots)
- Correlate the PCIe slot locations and interface names on PowerFlex custom node servers
- Configure the ports on RHEL/CentOS nodes
- Configure the ports on SLES nodes
- Installing the Drivers
- Preparing Disks
- Additional configurations
- Reference material
- Getting help
Dell PowerFlex Custom Node R650-R6525-R750 Hardware Configuration and Operating System Installation Guide for Linux
PowerFlex custom node deployment overview
This guide explains how to install the operating system and perform system configurations, such as network connectivity and ports, on PowerFlex custom node in a Linux-based environment with PowerFlex 3.x.
Use this guide after installing new or replacement PowerFlex custom nodes at the customer site, before deploying the system. Perform the procedures in this guide in the order they are presented.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"