Prerequisite: See the System Requirements for Using Quick
Boot During Remediation section in vSphere Update
Manager Installation and Administration Guide. It is recommended
that you carefully assess the configuration before enabling Quick Boot.
Quick Boot of an ESXi host is a setting that allows
Update Manager to optimize the remediation time of hosts that undergo
patch and upgrade operations. If the Quick Boot feature is enabled,
Update Manager skips the hardware reboot (the BIOS or UEFI firmware
reboot). As a result, the time that is spent by ESXi host in Maintenance Mode
is reduced, and the risk of failures during remediation is minimized.
Quick Boot is verified and is supported with a limited
set of hardware platforms, and drivers. Quick Boot is not supported on
ESXi hosts that use TPM or pass-through features. For more information
about ESXi 6.7.x, see vSphere Update Manager Installation and Administration Guide at vmware.com/support/pubs.
Dell EMC supports Quick Boot on the following platforms:
R630
R640
R740
R740xd
R740xd2
R730
R730xd
R740xd vSAN Ready Node
R640 vSAN Ready Node
NOTE: For
more information, see VMware KB article https://kb.vmware.com/s/article/52477 and
VMware vSphere 6.7.x on Dell EMC PowerEdge Servers Release Notes.
No hay datos disponibles para el tema
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Seleccione si el artículo le ha resultado útil o no.
Los comentarios no pueden contener caracteres especiales: <>()\