Dell Precision Mobile Workstation M4800 Owner's Manual

Installing the System Board

1. Connect the power connector cable to the system board.
2. Place the system board in its compartment.
3. Tighten the screws to secure the system board to the computer.
4. Connect the following cables:
   1. USH connector
   2. wi-fi switch cable
   3. wireless board connectors
   4. coin-cell battery
5. Install the wireless cards (if available).
6. Install the:
   1. display assembly
   2. I/O board
   3. video card
   4. video-card heat sink
   5. processor
   6. heat sink
   7. palmrest
   8. video-card fan
   9. processor fan
   10. secondary memory
   11. primary memory
   12. hard drive
   13. optical drive
   14. keyboard
   15. keyboard trim
   16. base cover
   17. battery
   18. ExpressCard
   19. SD card
7. Follow the procedures in After Working Inside Your Computer.