Dell PowerEdge RAID Controller S140 User’s Guide

A physical disk was removed

  1. Install the original physical disk if it was inadvertently removed, or replace it with a new or used physical disk.
  2. Initialize a new physical disk. Perform a Rescan for all physical disks that are replaced.
  3. If the physical disk was not removed, check that its cables are correctly installed.

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\