Dell PowerEdge RAID Controller S140 User’s Guide

PDF

Converting physical disk to RAID capable disk

CAUTION:Any data already existing on the disk will be lost during this operation. Ensure that you have backed up critical data before converting the physical disk to a RAID capable disk.
  1. Enter the Dell PERC S140 Configuration Utility. See Entering the DELL PERC S140 Configuration Utility.
  2. Click Controller Management > Convert to RAID Capable Disk.
  3. Select the RAID type.
    NOTE:RAID type will not be available if a RAID is already configured. To enable RAID type, convert the disk to a non RAID disk (see Converting physical disk to Non-RAID disk) and then convert them back to RAID capable disk.
  4. Select disk interface type.
  5. Select the physical disk to convert to a RAID capable disk. If you wish to select all the available disks, select Check All.
  6. Click Apply Changes to submit the changes selected.
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\