Dell PowerEdge RAID Controller S140 User’s Guide

PDF

Entering the BIOS configuration utility

  1. Turn on the system.
  2. While the system starts up, press Ctrl+R to boot to the BIOS configuration utility.
    CAUTION:If the SATA controller is not set to RAID Mode, data might be destroyed. Ensure that you backup all data before changing modes.
    NOTE: If the BIOS Configuration Utility <Ctrl><R> does not appear and your system uses a PERC S140, press F2 to access the system BIOS. In the SATA Settings field, ensure that SATA controller is set to RAID Mode. If the settings are correct and the BIOS Configuration Utility <Ctrl><R> does not appear, contact the Technical Support team.
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\