Dell PowerEdge RAID Controller S140 User’s Guide

PDF

Boot mode, boot sequence, and or boot sequence retry are set incorrectly

  1. Turn on the system.
  2. When the Dell POST screen is displayed, press F2 to enter the system BIOS screen.
  3. Scroll to Boot Settings. Press Enter and ensure that Boot Mode is set to BIOS.
  4. Scroll to Boot Sequence. Press Enter and ensure that Hard drive C: is the first device listed.
  5. Scroll to Boot Sequence Retry. Ensure that the setting is Enabled.
  6. Press Esc to exit and continue booting.
    NOTE:If changes are made at the BIOS screen, a dialog box is displayed and asks you to save your changes and then exit.
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\