Dell PowerEdge RAID Controller S140 User’s Guide

PDF

Changing the boot order of the virtual disks

Set Bootable Device allows you to change the boot order of the virtual disks.
  1. Enter the Dell PERC S140 Configuration Utility. See Entering the DELL PERC S140 Configuration Utility.
  2. Click Controller Management > Change Controller Properties.
  3. Click Set Bootable Device.
    A Change Order dialog box displays the list of virtual disks available.
  4. Use the arrow keys to set a virtual disk and + or – to change the order of the virtual disks that need to be booted first.
  5. Click Ok.
    The changes to the boot order of the virtual disks are displayed.
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\