Dell PowerEdge RAID Controller S140 User’s Guide

Entering the DELL PERC S140 Configuration Utility

1. Turn on the system.
2. While the system starts up, press <F2> to enter System Setup.
   The list of menu items in the System Setup Main Menu screen is displayed.
3. Click Device Settings.
   Device Settings lists the NIC ports and all the options of the S140 configuration utility.

   To access the management menu for the controller, use the arrow keys or the mouse.

   NOTE:For more information on all the options, click Help in the top right-hand corner of the browser screen. Help information for individual option menus can also be viewed by scrolling down on each option.

   NOTE:Some of the options within the UEFI RAID configuration utility are not present if the controller does not support the corresponding feature. Options may also be grayed out if the feature is not supported in existing configuration.
4. Click Dell PERC S140 Configuration Utility.
   Displays the list of Configuration Options:

   Table 1. Configuration OptionsConfiguration Options

   Configuration options	Description
   Controller Management	Allows you to configure, manage, and view the controller properties.
   Virtual Disk Management	Allows you to configure, manage, and view the virtual disk properties.
   Physical Disk Management	Allows you to configure, manage, view and perform varied operations on the physical disk properties.

   NOTE:Loading default settings in this page by clicking on Default button will not cause any changes in the controller settings.