Dell PowerEdge RAID Controller S140 User’s Guide
Migrating a virtual disk
- Turn off the system that contains the source controller.
- Turn off the target system if the system does not support hot swap of physical disks.
- Move the appropriate physical disks from the
source controller to the target controller in the target system.
Physical disks do not have to be inserted into the same slots in the target system.
- If the target system was turned off, turn on the system.
CAUTION: The
BIOS Configuration Utility pauses, and prompts for
action, for the degraded virtual disk(s), if the "pause if degraded"
option is enabled in the BIOS Configuration Utility.
CAUTION: After the migration occurs, ensure that all of the physical disks
have been migrated and are present in the appropriate virtual disks.
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Veuillez évaluer cet article (1 à 5 étoiles).
Avez-vous trouvé cet article utile?
Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\