Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Alienware m15 R3 Service Manual

Installing the M.2 2280 solid-state drive

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

NOTE This procedure applies if you are installing a M.2 2230 solid-state drive in the following M.2 card slots:
  • M.2 card slot 1
  • M.2 card slot 2

The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the installation procedure.

Installing the M.2 2280 solid-state drive

Installing the M.2 2280 solid-state drive

Steps

  1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot on the system board.
  2. Slide the M.2 2280 solid-state drive into the M.2 card slot on the system board.
  3. Slide the M.2 2280 thermal shield into the slot on the M.2 SSD frame.
  4. Align the screw hole on the M.2 2280 thermal shield to the screw hole on the palm-rest assembly.
  5. Replace the screw (M2x2.5) that secures the M.2 2280 solid-state drive to the palm-rest assembly.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\