OpenManage Integration for VMware vCenter Version 4.3 Compatibility Matrix

Overview

This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software.

The OpenManage Integration for VMware vCenter 4.3 provides the following features:
  • Support for the following:
    • PowerEdge MX7000 modular infrastructure
      • PowerEdge MX740c and PowerEdge MX840c servers.
      • Chassis and Servers management using unified Chassis Management IP
      • Standalone and Multi-Chassis Configuration deployment modes of PowerEdge MX7000 chassis.
      • PowerEdge R940 XA
  • Enhancement in Chassis Profile test connection flow to make it automated.
  • Support for OEM servers for OMIVV workflows.
  • Support for VSphere 6.7U1 and VSphere 6.5U2.
  • The following enhancements in the Firmware Update workflow:
    • Support to perform Clear Job Queue and reset iDRAC while creating a Firmware Update job.
    • Support to provide Custom Online Catalog location for a firmware update.
    • Support for HTTPS as default communication with Dell.com domains.
  • Enhanced support in the OS deployment workflow:
    • OS deployment management network on PCI NICs.
    • OS deployment on the BOSS disk.
  • Support to report Remaining Rated Write Endurance metrics for SSD in OMIVV.
NOTE It is recommended to use Dell EMC OpenManage Enterprise-Modular Edition Version 1.00.01 with OMIVV 4.3.
NOTE From OMIVV 4.0 onwards, only VMware vSphere Web client is supported and the vSphere Desktop client is not supported.
NOTE For vCenter 6.5 and later, the OMIVV appliance is available only for the flash version. The OMIVV appliance is not available for the HTML5 version.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\