Windows用SIM/eSIMセットアップ ガイド
Managing eSIM profiles on Microsoft Intune
There are three ways to add profiles to Microsoft Intune.
- Connecting directly to the Carrier network or by using an Orchestrator.
- Sending a list of EIDs to the Carrier network then using an eSIM Directory Service.
- Sending a list of EIDs to the Carrier network then uploading a file from the Carrier network into Microsoft Intune.
Adding new profiles by connecting to the Carrier network
Connect Microsoft Intune Instance to the Carrier network directly or over an orchestrator like Nokia IMPACT Mobile Device Manager or IDEMIA The Smart Connect Hub.
See eSIM Enterprise Management - Windows Client Management | Microsoft Learn
Adding new profiles using an eSIM directory service
The Enterprise sends a list of EIDs of the computers to the Carrier network (see Your organization obtains eSIMs in bulk from your Carrier network for more details). These profiles are then placed on an eSIM download server, for example, a (SM-DP+ or SM-DS). The enterprise then connects this eSIM download server to their Microsoft Intune instance using a fully qualified domain name (FQDN). This connection allows the computers to access the eSIM profiles. As the eSIM profiles are already associated with the EIDs, individual activation codes are not required. Each computer can automatically pull the correct eSIM profile from the download server.
The MDM administrator creates an eSIM configuration profile within Microsoft Intune. This profile includes the details of the eSIM download server. The administrator then assigns this configuration profile to the relevant groups of computers.
Adding new profiles by uploading a file from the mobile Carrier
The Enterprise sends a list of EIDs and IMEIs of the computers to the Carrier network (see Your organization obtains eSIMs in bulk from your Carrier network). The Carrier network delivers the profiles by sending a CSV file with a set of activation codes and the corresponding EID for up to 1000 computers.
This profile is imported by selecting .
Now add the profile to a Microsoft Entra device group and assign to the device by selecting .
The file format of the CSV file
is:
eSIM Download Server FQDN (typically an SM-DP+ address)
ICCID, Activation Code
For example:
smdp.rsp.kiren.com
6798247123401641590, TBQC1B71SSEBCLZU
6798247123401641591, TBQC1B71SSEBCLZV
6798247123401641592, TBQC1B71SSEBCLZW
注:
- The activation codes must be unique within the CSV file.
- There can only be one list per eSIM download server or Carrier network. If you need to add new eSIM activation codes, you can either add them to the existing CSV file if some of those activation codes remain active or remove the current CSV file and add a new file with the new activation codes.
- If you need more than 1000 activation codes active at one time, it is recommended that you connect directly to the eSIM Directory Service.
注意:このコンテンツは、AIで翻訳されている可能性があります。詳細については、 こちらを参照してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\