Windows用SIM/eSIMセットアップ ガイド
Using the eSIM profile inside the computer
Selecting lists a set of buttons for each of the Profiles that you have downloaded.
注:Wi-Fi connectivity is required for the Use or Delete
operations to function properly. If there are communication issues, an error message may or
may not be displayed.
- Use: If you have an eSIM profile that is downloaded, you need to enable it by either accepting the pop-up or selecting Use. Ensure that you are connected to Wi-Fi before you answer the prompt: “This will use cellular data from your plan and may occur charges. Do you want to continue?” Choose Yes to turn the eSIM on or No to keep it off but downloaded.
- Edit name: If you have an eSIM profile name that is not easily recognizable, for example, TSL_0210, you can customize it when prompted.
- Delete: If you have to delete a downloaded profile, possibly due to a full eUICC, press Delete. Ensure that you are connected to Wi-Fi before you answer the prompt: This profile will be permanently deleted, and you’ll need to contact your mobile operator to add it again. Continue?” Choose Yes to delete the profile or No to keep the profile on your computer.
注意:このコンテンツは、AIで翻訳されている可能性があります。詳細については、 こちらを参照してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\