- Notes, cautions, and warnings
- Introduction
- Installing vSphere 7.0
- Download the Dell EMC customized ESXi image files
- To install, enable or to disable ESXi
- Overview of Dell NUMA Fault Resilient Memory
- Enable Dell NUMA Fault Resilient Memory
- Overview of Dell Fault Resilient Memory
- Enabling Dell Fault Resilient Memory
- Dell EMC NVDIMM-N persistent memory
- Intel Optane Data Center Persistent Memory Module
- 4K Native hard drive support with ESXi hosts
- Trusted Platform Module
- Quick Boot
- HTTP/HTTPS boot
- vSphere Life Cycle Manager
- Dell EMC add-on package
- Surprise removal of NVMe device
- Installing ESXi on flash media
- Installing ESXi on the hard drive
- Installing ESXi on the BOSS-S1 device
- Enabling or disabling flash storage device
- Configuring one-time boot to ESXi
- Configuring boot sequence to ESXi
- VMware ESXi Secure boot support for Dell EMC PowerEdge Servers
- Downloading patches and updates for ESXi
- Creating vCenter Server installation media
- Installing vCenter Server
- Deploying vSphere 7.0
- Back up and restore configuration
- Licensing information
- Troubleshooting ESXi
- Getting help
VMware vSphere ESXi 7.x on Dell EMC PowerEdge Servers Installation Instructions and Important Information Guide
Introduction
This document helps you to deploy VMware ESXi 7.0 on Dell EMC PowerEdge servers, and provides specific information about recommended configurations, best practices, and additional resources.
- vSphere Essentials Plus
- vSphere Standard
- vSphere Enterprise (two and four CPU offerings only)
- vSphere Enterprise Plus (two and four CPU offerings only)
- VMware vCenter Server
- VMware vSAN
NOTE: Before deploying the system, it is recommended that you see the
VMware vSphere
7.0 on Dell EMC PowerEdge Servers Release Notes at
www.dell.com/virtualizationsolutions.
NOTE: vSphere Essentials Plus is an all-inclusive package that includes licenses for three physical servers, each server with up to two processors. It also includes VMware vCenter Server to centrally manage the servers. vSphere Essentials Plus edition is supported only on two-socket servers. More licenses must still be deployed on approved servers for
Dell EMC support.
NOTE: With the release of vSphere 7.0, all Partner Activation Codes that are shipped with current servers are for vSphere 7.0 licensing. If you have an active vSphere subscription, you can downgrade or upgrade vSphere, as you choose. To get your downgrade keys, register your Partner Activation Code and login to
vmware.com/accounts. Go to
7.0 on the license administration portal.
NOTE: VMware vSAN is licensed independently per socket, per server. To use VMware vSAN, the server requires a vSphere license (per socket, per server) and a vCenter Server license.
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\