메인 콘텐츠로 이동
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.

Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

Formatting a Partition

You can format an existing partition on the vFlash SD card based on the type of file system. The supported file system types are EXT2, EXT3, FAT16, and FAT32. You can only format partitions of type Hard Disk or Floppy, and not CD. You cannot format read-only partitions.
Before creating an partition from an image file, make sure that:
  • You have Access Virtual Media privilege.
  • The card is initialized.
  • The card is not write-protected.
  • An initialize operation is not being performed on the card.

To format vFlash partition:

  1. In iDRAC7 Web interface, go to Overview > Server > vFlash > Format . The Format Partition page is displayed.
  2. Enter the required information and click Apply. For information about the options, see the iDRAC7 Online Help . A warning message indicating that all the data on the partition will be erased is displayed.
  3. Click OK. The selected partition is formatted to the specified file system type. An error message is displayed if:
    • The card is write-protected.
    • An initialize operation is already being performed on the card.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.