- Notes, cautions, and warnings
- About this guide
- Revision history
- Overview
- ACL messages
- ALM messages
- BFD message
- BGP messages
- CLI shell management messages
- CMS messages
- DCBX messages
- DELAY_RESTORE_PORT messages
- DHCP message
- Dot1X messages
- EQM messages
- ETL messages
- EVPN message
- FCoE messages
- FC messages
- FEFD messages
- IGMP messages
- Infra AFS messages
- Interface messages
- IP address messages
- IPv6 messages
- iSCSI messages
- L3-CORE-SERVICES message
- LACP message
- LB messages
- LLDP messages
- LLFC message
- Management route message
- MLD messages
- NDM messages
- NLB messages
- OpenFlow messages
- OSPFv2 message
- OSPFv3 messages
- PBR messages
- PIM messages
- PM messages
- Port security messages
- PTP messages
- QoS messages
- RA guard system log message reference
- Scale VLAN profile messages
- Software license messages
- Static and dynamic route message
- STP message
- SupportAssist messages
- Symmetric hashing messages
- SyncE ESMC messages
- SYSTEM_MODE_CHNG message
- Telemetry messages
- UFD messages
- User management messages
- VLT messages
- VRF messages
- VRRP messages
- VXLAN messages
Dell SmartFabric OS10 System Log Message Reference
EQM messages
This section lists the Equipment Manager (EQM) system log messages.
| System log message | Severity | Description | Recommended action |
|---|---|---|---|
| EQM_ADMIN_DOWN: Unit down reason: admin down | INFORMATIONAL | Indicates that the unit went down due to admin state down. | No action is required. |
| EQM_FAN_FAULT_MINOR: Fan fault minor warning Fan tray %d fan %d is not working | WARNING | Indicates that one of the fans is malfunctioning. | Remove and reinsert the corresponding fan tray. |
| EQM_FAN_FAULT_MAJOR: Fan tray fault major warning | CRITICAL | Indicates that a major fault is present with one of the fan trays. | Remove and reinsert the corresponding fan tray. |
| EQM_FAN_TRAY_DETECTED: Fan tray present fan tray %d | INFORMATIONAL | Indicates that a fan tray is detected. | No action is required. |
| EQM_FAN_TRAY_OFF: Fan tray power off or removed fan tray %d | CRITICAL | Indicates that a fan tray is removed. | If this message is not expected, check for any loose contacts or if device is not seated properly. |
| EQM_MEDIA_NOT_PRESENT: Media removed from slot:%u port:%s | CRITICAL | Indicates that a media is removed. | If not expected, check if the media is properly inserted. |
| EQM_MEDIA_PRESENT: Media inserted Media %s in slot:%u port:%s serial number:%s is %s | INFORMATIONAL | Indicates that a media is inserted. | No action is required. |
| EQM_MEDIA_QSA28_EXPECTED: QSA28 adapter expected with %s in slot:%u port:%s | CRITICAL | Indicates that the platform expects a QSA28 adapter but the inserted optic is not QSA28. | Check the media adapter that is connected to the port. If the media adapter is a QSA adapter, replace the adapter with a QSA28 adapter. |
| EQM_PAS_NOT_READY: PAS service is not ready yet | CRITICAL | Indicates that platform abstraction service (PAS) has not yet come up. | Check if PAS is unresponsive.System reboots after some time. |
| EQM_PSU_DETECTED: Power supply unit present PSU %d | INFORMATIONAL | Indicates that power supply unit (PSU) is detected. | No action is required. |
| EQM_PSU_OFF: Power supply unit power off or removed PSU %d | CRITICAL | Indicates that PSU is removed or power is turned off for the PSU. | If this message is not expected, check the PSU and the power-source for any loose contacts or loss of power. |
| EQM_RELOAD_WARNING: Unit reloaded 5 times in 60 minutes unit <card-id> | WARNING | Indicates that the specified unit has reloaded 5 times within 60 minutes time frame. | No action is required. |
| EQM_SOFTWARE_TRIGGERED: Unit down reason: software triggered %s | INFORMATIONAL | Indicates that the unit went down due to software triggered reset. | No action is required. |
| EQM_TYPE_MISMATCH: Unit down reason: type mismatch | INFORMATIONAL | Indicates that the unit went down due to equipment type mismatch. | No action is required. |
| EQM_UNIT_CHECKIN: Unit check-in detected unit <card-id> (type %s) | INFORMATIONAL | Indicates that EQM has identified the specific card-type and the system ports. | No action is required. |
| EQM_UNIT_CRASHED: Unit down reason: unit crashed | INFORMATIONAL | Indicates that the unit went down due to unit crash. | No action is required. |
| EQM_UNIT_DETECTED: Unit present unit <card-id> | INFORMATIONAL | Indicates that EQM has detected that the card. | No action is required. |
| EQM_UNIT_DOWN: Unit is down unit <card-id> - %s | CRITICAL | Indicates that EQM has detected that the card is reset. | No action is required. |
| EQM_UNIT_NO_CHECKIN: Unit not check-in | WARNING | Indicates that EQM does not detect that the card is checked-in. | Check for any service failures in the system. |
| EQM_UNIT_OFFLINE: Unit is in offline state unit <card-id> | INFORMATIONAL | Indicates that EQM has detected that the card is offline. | Check the reason due to which the card is offline. |
| EQM_UNIT_PWRON: Unit powered-on unit <card-id> | INFORMATIONAL | Indicates that EQM has detected that the card is powered on, and it is in the process of check-in. | No action is required. |
| EQM_UNIT_RESET: Unit is being reset unit <card-id> | INFORMATIONAL | Indicates that EQM has detected that the card is checked-in after reset. | No action is required. |
| EQM_UNIT_RETRY_RESET: Unit power cycled reload unit <card-id> | INFORMATIONAL | Indicates that EQM is retrying to reset due to some problem detected. | No action is required. |
| EQM_UNIT_SHUTDOWN: Unit shut down unit <card-id> | CRITICAL | Indicates that EQM is forcing to shut down on the card due to some problem. | Check for other alarms that are related to temperature. |
| EQM_UNIT_SW_NOT_SUPPORTED: Unit type is not supported by this software version unit <card-id> | WARNING | Indicates that the specified unit is not compatible with the software version. | Contact Dell technical support for assistance. |
| EQM_UNIT_UNLICENSED: Unit is down due to license vilation unit <card-id> | INFORMATIONAL | Indicates that the unit went down due to license issues. | Contact Dell technical support for assistance. |
| EQM_UNIT_UP: Unit is up unit <card-id> | INFORMATIONAL | Indicates that EQM declared that the card is ready. | No action is required. |
| EQM_UNKNOWN: Unit down reason: unknown | INFORMATIONAL | Indicates that the unit went down due to unknown reason. | No action is required. |
| EQM_UNLICENSED: Unit down reason: unlicensed | INFORMATIONAL | Indicates that the unit went down due to unlicensed reason. | No action is required. |
| EQM_VERSION_MISMATCH: Unit down reason: version mismatch | INFORMATIONAL | Indicates that the unit went down due to version mismatch. | No action is required. |
| EQM_SYSTEM_RELOAD: User request to reload system | INFORMATIONAL | Indicates that user initiated system reboot. | No action is required. |
| EQM_TML_WARN_CROSSED: Thermal threshold crossed warning | WARNING | Indicates that one of the temperature sensors has crossed the warning threshold. | Check for any faulty fan trays and so on. The speed of the fans increases automatically. |
| EQM_TML_MINOR_CROSSED: Thermal threshold crossed minor warning | WARNING | Indicates that one of the temperature sensors has crossed the minor threshold. | Check for any faulty fan trays and so on. The speed of the fans increases automatically. |
| EQM_TML_MAJOR_CROSSED: Thermal threshold crossed major warning | CRITICAL | Indicates that one of the temperature sensors has crossed the minor threshold. | Check for any faulty fan trays and so on. The speed of the fans increases automatically. |
| EQM_TML_CRIT_CROSSED: Thermal threshold crossed critical warning | CRITICAL | Indicates that one of the temperature sensors has crossed the critical threshold. | Check for any faulty fan trays and so on. The speed of the fans increases automatically. |
| EQM_FANTRAY_FAULT: Fan tray fault | WARNING | Indicates that a fan tray is faulty. | Remove and reinsert the corresponding fan tray. |
| EQM_FANTRAY_NOT_PRESENT: Fan tray absent %s | WARNING | Indicates that a fan tray is removed or not detected. | For a false alarm, remove and reinsert the fan tray. |
| EQM_PSU_FAULT: Power supply unit (PSU) fault | WARNING | Indicates that a PSU is faulty. | Check if PSU and power cable are properly inserted and the power-source is working properly. |
| EQM_PSU_NOT_PRESENT: Power supply unit (PSU) absent | WARNING | Indicates that a PSU has been removed. | If this message is not expected, check if the PSU is properly inserted. |
| EQM_MORE_PSU_ABSENT: More power supply unit (PSU) absent | CRITICAL | Indicates the absence of multiple PSU units if the platform has many PSU slots. | If this message is not expected, check if the PSU is properly inserted. |
| EQM_MORE_PSU_FAULT: More power supply unit (PSU) fault | CRITICAL | Indicates that the PSU has multiple PSU faults. | Check if PSU and power cable are properly inserted and the power-source is working properly. |
| EQM_PSU_FAULT_CRIT: Power supply unit (PSU) fault alert | CRITICAL | Indicates that power source has failed. | Check the power source. |
| EQM_FAN_AIRFLOW_UNKNOWN: Fan airflow speed unknown | WARNING | Indicates that the airflow direction cannot be determined. | Check if device is properly inserted. |
| EQM_FAN_AIRFLOW_MISMATCH: Fan airflow speed mismatch | CRITICAL | Indicates that fan trays are not mutually compatible. | Check the PPID of all fan trays or PSU for compatibility. |
| EQM_ALL_FANTRAY_ABSENT: All fan trays absent | CRITICAL | Indicates that none of the fan trays are inserted. | If fan trays are inserted check that they are seated properly. |
| EQM_ALL_FANTRAY_FAULT: All fan trays fault | CRITICAL | Indicates that all fan trays are faulty. | If fan trays are inserted check whether they are seated properly, and there is no blockage in the air circulation. |
| EQM_LPC_FAULT: LPC bus error | CRITICAL | Indicates that fault is detected due to the LPC bus error. | Contact support team for RMA process. |
| EQM_MEDIA_TEMP_HIGH: Media high temperature threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the high temperature major threshold is crossed. | Check fan units and check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_TEMP_HIGH_WARNING: Media high warning temperature threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the high temperature minor threshold is crossed. | Check fan units and check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_TEMP_LOW_WARNING: Media low warning temperature threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the low temperature minor threshold is crossed. | Check fan units and check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_TEMP_LOW: Media low temperature threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the low temperature major threshold is crossed. | Check fan units and check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_VOLTAGE_HIGH: Media high voltage threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the high-voltage major threshold is crossed. | Check fan units and check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_VOLTAGE_HIGH_WARNING: Media high warning voltage threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the high-voltage minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_VOLTAGE_LOW_WARNING: Media low warning voltage threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the low voltage minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_VOLTAGE_LOW: Media low voltage threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the low voltage major threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_RX_POWER_HIGH: Media high rx_power threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the high rx power major threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_RX_POWER_HIGH_WARNING: Media high warning rx_power threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the high rx power minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_RX_POWER_LOW_WARNING: Media low warning rx_power threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the low rx power minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_RX_POWER_LOW: Media low rx_power threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the low rx power major threshold is crossed. | Check whether media type is supported. Try replacing the media. |
| EQM_MEDIA_TX_POWER_HIGH: Media high tx_power threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the high tx power major threshold is crossed. | Check whether the media is supported. Try replacing the media. |
| EQM_MEDIA_TX_POWER_HIGH_WARNING: Media high warning tx_power threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the high tx power minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_TX_POWER_LOW_WARNING: Media low warning tx_power threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the low tx power minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_TX_POWER_LOW: Media low tx_power threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the low tx power major threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_BIAS_HIGH: Media high bias threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the high bias current major threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_BIAS_HIGH_WARNING: Media high warning bias threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the high bias current minor threshold is crossed. | Check whether the media type is supported. Try replacing the media. |
| EQM_MEDIA_BIAS_LOW_WARNING: Media low warning bias threshold crossed minor warning | WARNING | Indicates that Digital Optical Monitoring (DOM) detected that the low bias current minor threshold is crossed. | Check whether media type is supported. Try replacing the media. |
| EQM_MEDIA_BIAS_LOW: Media low bias threshold crossed major warning | CRITICAL | Indicates that Digital Optical Monitoring (DOM) detected that the low bias current major threshold is crossed. | Check whether media type is supported. Try replacing the media. |
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
문서가 도움이 되었는지 여부를 선택하십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.