Configuring
Active Directory With Standard Schema Using iDRAC7 Web Interface
NOTE: For information about
the various fields, see the
iDRAC7 Online Help.
In the iDRAC7 Web interface, go to
Overview >
iDRAC Settings >
User Authentication >
Directory Services >
Microsoft Active Directory.
The
Active Directory summary page
is displayed.
Click
Configure Active Directory.
The
Active Directory Configuration and Management
Step 1 of 4
page is displayed.
Optionally, enable certificate validation and upload the
CA-signed digital certificate used during initiation of SSL connections
when communicating with the Active Directory (AD) server. For this,
the Domain Controllers and Global Catalog FQDN must be specified.
This is done in the next steps. And hence the DNS should be configured
properly in the network settings.
Click
Next.
The
Active Directory Configuration and Management
Step 2 of 4
page is displayed.
Enable Active Directory and specify the location information
about Active Directory servers and user accounts. Also, specify the
time iDRAC7 must wait for responses from Active Directory during iDRAC7
login.
NOTE: If certificate
validation is enabled, specify the Domain Controller Server addresses
and the Global Catalog FQDN. Make sure that DNS is configured correctly
under
Overview >
iDRAC
Settings
>
Network.
Click
Next. The
Active
Directory Configuration and Management Step 3 of 4
page
is displayed.
Select
Standard Schema and click
Next.
The
Active Directory Configuration and Management
Step 4a of 4
page is displayed.
Enter the location of Active Directory global catalog server(s)
and specify privilege groups used to authorize users.
Click a
Role Group to configure
the control authorization policy for users under the standard schema
mode.
The
Active Directory Configuration and Management
Step 4b of 4
page is displayed.
Specify the privileges and click
Apply.
The settings are applied and the
Active Directory
Configuration and Management Step 4a of 4
page is displayed.
Click
Finish. The Active Directory
settings for standard schema is configured.