You can download
the contents of a vFlash partition in the
.iso format to the:
Managed system (where iDRAC7 is operated from)
Network location mapped to a management station.
Before downloading the partition contents, make sure that:
You have Access Virtual Media privileges.
The vFlash functionality is enabled.
An initialize operation is not being performed on the card.
For a read-write partition, it must not be attached.
To download the contents of the vFlash partition:
In the iDRAC7 Web interface, go to
Download Partition page is
Label drop-down menu, select
a partition that you want to download and click
NOTE: All existing
partitions (except attached partitions) are displayed in the list.
The first partition is selected by default.
Specify the location to save the file. The contents of the selected partition are downloaded to the
NOTE: If only the folder location is specified,
then the partition label is used as the file name, along with the
.iso for CD and Hard Disk type partitions, and
.img for Floppy and Hard Disk type partitions.